Asian Paints Berger Royale Play Bariq, 4Kg, Glazed Plume, Interior Metallic Finish, Designer Pack

It’s suitable for interior and exterior walls. Ideal surfaces include clean plaster, cement-based substrates, cement boards, and primed wood. For very porous or newly prepared surfaces, proper priming is recommended to ensure best adhesion and finish.

Key specs: water-based acrylic copolymer texture coating with a glazed plume finish, packaged in 4 kg. Features include fast drying, good coverage and adhesion, moisture resistance, fade resistance, anti-microbial and anti-fungal properties, and a durable, easy-to-clean surface.

The Glazed Plume finish provides a distinctive plume texture with a smooth yet dynamic glaze. For best results, apply with a suitable textured roller or brush and use even, overlapping strokes. The product’s double-layer approach is designed to simplify the application while delivering a premium, long-lasting look.

Priming is recommended for very porous, rough, or newly prepared surfaces to ensure uniform adhesion and color retention. On clean, sound surfaces, you can proceed with staining or applying the glaze directly after surface preparation.

Prepare the surface (clean, repair, sand), stir the product well, and apply using an appropriate tool (brush, roller, or sprayer) for a consistent texture. Allow the first coat to dry to the touch, then apply a second coat as needed to achieve the desired finish. Drying times can vary with temperature and humidity, but expect a few hours between coats; full cure takes longer, as with most acrylic textures.

Use brushes or rollers suited for texture coatings (textured rollers or stipple brushes work well). For spraying, follow the sprayer manufacturer’s recommendations. Clean tools with soap and water immediately after use to prevent drying and clogging.

Yes, it’s designed for interior use as a water-based product with relatively low odor. Ensure good ventilation during application, wear protective gear if needed, and avoid skin or eye contact. Store in a cool, dry place away from children and food areas.

This product combines a glaze texture with a durable, moisture-resistant acrylic base and a distinctive plume finish. The double-layer technology aids ease of application while delivering a premium, long-lasting look compared with flat paints or simpler textures. It’s particularly suited for a modern, decorative interior/exterior wall effect.

Typically, two coats are recommended to achieve a rich glaze plume texture and uniform coverage. Allow adequate drying time between coats for the best result, and assess need for a third coat only if you desire a deeper or more pronounced texture.

If you’re exploring alternatives within the Royale Play range or similar texture coatings on Fepy, you may consider these options: - https://fepy.com/product/asian-paints-berger-royale-play-bariq-glazed-plume-4kg - https://fepy.com/product/berger-royale-play-bariq-sandstone-texture-4kg - https://fepy.com/product/berger-royale-play-bariq-glazed-plume-2-5kg Each offers a distinct texture and finish while retaining the durability and moisture resistance of Royale Play textures.

The product is designed to deliver a premium glaze texture that lasts longer and resists wear, dirt, and moisture better than some standard paints. Its durable finish reduces frequent redecorating, and the 4 kg pack provides substantial coverage for typical walls, making it a cost-efficient option for achieving a stylish and durable look with fewer touch-ups over time.