Asian Paints Berger Select Fine Texture, 18L, Aqua, Exterior Fine Textured Finish, Weather-Resistant

It is suitable for a wide range of surfaces including wood, concrete, stone, metal, brick, plastic, plaster, and other common wall substrates. Ensure the surface is clean, dry, and sound before application.

Key features include water-based acrylic copolymer resin, low VOC and zero odor emissions, non-yellowing finish, good adhesion and flexibility, breathable film, UV protection, dirt and algae resistance, and easy water-based cleanup.

Prep the surface by cleaning and drying it, remove loose material, and repair any defects. Stir the product well before use. Apply with a spray, brush, or roller, using even, consistent strokes to achieve the desired texture. If applying over glossy surfaces, consider light scuffing or priming for better adhesion.

Typically, two coats provide the best texture and durability. Drying between coats depends on temperature and humidity; in normal conditions, recoat after a few hours. Allow sufficient time for full cure as recommended on the product label.

Yes. It features a low odor formula and low VOC levels with zero odor emissions, making it safer for use around children and pets when used as directed and in well-ventilated areas.

Clean with water and mild soap if needed. The coating is designed to be washable; avoid harsh solvents that could damage the texture or finish.

Store in a cool, dry place in a tightly closed container. Keep away from direct heat sources and frost. Use within the product’s shelf life and follow any label instructions for storage.

Berger Select Fine Texture Aqua offers a balanced combination of adhesion, breathability, UV protection, and algae resistance with low odor and VOC levels. For alternatives on Fepy, you can compare with similar textured coatings such as Berger Select Coarse Texture and Berger WeatherCoat Exterior Texture. See these related listings on Fepy: https://fepy.com/product/berger-select-fine-texture-coarse-18l-aqua and https://fepy.com/product/berger-weathercoat-exterior-texture-20l

This coating adheres well to properly prepared substrates. If you’re applying over glossy or very smooth surfaces, roughen them slightly or apply a bonding primer for improved adhesion. Follow surface preparation guidelines to ensure best results.

Coverage depends on surface texture, porosity, and the method of application. For textured coatings, exact coverage can vary. It’s best to determine the amount based on the area to be coated and the texture you desire, using the guidance provided on the product’s packaging and any local recommendations. Plan extra material for cuts and texture consistency.

If you’re exploring alternatives on Fepy, you can view related texture options by visiting these listings: https://fepy.com/product/berger-select-fine-texture-coarse-18l-aqua for a coarser finish and https://fepy.com/product/berger-weathercoat-exterior-texture-20l for an exterior-grade option. These pages show other textures with similar use cases, enabling side-by-side comparisons on Fepy.