Asian Paints Berger SmartCare Bitushield Emulsion

It adheres well to cement, asbestos, fibre cement board, and concrete surfaces, providing strong adhesion and long-lasting exterior protection.

Key features include water-based formulation, self-cleaning action, resistance to fungal and algal growth, fast drying, and enhanced durability from acrylic polymer and silica-based components for exterior protection.

Start with a clean, dry surface. Repair cracks or defects, remove loose paint, and ensure the wall is free from moisture. Prime if required and apply under suitable weather conditions, avoiding very wet or extreme heat days.

Typically, apply two coats for exterior protection using a brush, roller, or spray. Allow the first coat to dry before applying the second coat, following the product label for specific timing.

Bitushield is described as fast-drying. For precise drying times and recoat intervals, refer to the product page or label instructions on the can.

Clean tools with water and mild detergent while the paint is still wet. Once dry, remove residue according to local disposal guidelines.

It is a water-based acrylic paint with relatively low odor compared to solvent paints and should meet typical regulatory norms for exterior paints. Always follow safety precautions and use personal protective equipment as needed.

Bitushield Emulsion is available in a wide range of colours to suit different exteriors. Check the color cards on the product page for current options.

Bitushield emphasizes strong weather resistance and self-cleaning properties. For a quick comparison, consider these alternatives available on Fepy: Berger WeatherCoat Exterior Emulsion (https://fepy.com/product/berger-weathercoat-exterior-emulsion), Asian Paints Apex Exterior Emulsion (https://fepy.com/product/asian-paints-apex-exterior-emulsion), Nippon WeatherGuard Exterior Emulsion (https://fepy.com/product/nippon-weatherguard-exterior-emulsion), and Dulux Weathershield Exterior Emulsion (https://fepy.com/product/dulux-weathershield-exterior-emulsion).

Ideal for exterior walls of residential and commercial buildings where long-lasting protection against weather, UV exposure, and moisture is desired. Suitable for cement, asbestos, fibre cement boards, and concrete surfaces.

Store in a cool, dry place away from direct sunlight. Keep the container tightly closed when not in use. Follow local regulations for disposal of paint and containers; avoid pouring unused paint down drains.