Asian Paints Berger SmartCare Bitushield Emulsion, 200L, Elastomeric Bitumen Emulsion

It can be applied on concrete surfaces, metal structures, wooden substrates, and masonry to provide waterproofing protection.

A single drum (200 liters) can cover approximately up to 1000 square meters depending on surface porosity and application thickness.

Yes, Bitushield offers UV resistance to ensure long-lasting protection in outdoor applications.

Yes, being water-based makes it an eco-friendly alternative compared to solvent-based waterproofing solutions.

Yes, it can act as both an adhesive and a protective coating in various construction applications like waterproofing roofs or basements.

No primer is required; however, surfaces should be cleaned thoroughly before applying the emulsion for optimal adhesion and performance.

Asian Paints Berger SmartCare Bitushield Emulsion is a water-based acrylic exterior paint designed to protect walls from extreme weather. It forms a protective shield on surfaces, offers self-cleaning properties, dries quickly, and resists fungal and algal growth thanks to its acrylic polymer and silica-based components for enhanced durability.

It adheres well to cement, asbestos, fibre cement board, and concrete surfaces, providing strong adhesion and long-lasting exterior protection.

Key features include water-based formulation, self-cleaning action, resistance to fungal and algal growth, fast drying, and enhanced durability from acrylic polymer and silica-based components for exterior protection.

Start with a clean, dry surface. Repair cracks or defects, remove loose paint, and ensure the wall is free from moisture. Prime if required and apply under suitable weather conditions, avoiding very wet or extreme heat days.

Typically, apply two coats for exterior protection using a brush, roller, or spray. Allow the first coat to dry before applying the second coat, following the product label for specific timing.

Bitushield is described as fast-drying. For precise drying times and recoat intervals, refer to the product page or label instructions on the can.

Clean tools with water and mild detergent while the paint is still wet. Once dry, remove residue according to local disposal guidelines.

It is a water-based acrylic paint with relatively low odor compared to solvent paints and should meet typical regulatory norms for exterior paints. Always follow safety precautions and use personal protective equipment as needed.