Asian Paints Berger 20kg SmartCare Tile Adhesive GP - Grey

It is formulated to bond well with a range of substrates such as concrete, cement, gypsum boards, bricks, ceramic tiles, and marble. It supports most common tile types used in interior tiling projects and is suitable for both wall and floor installations.

Yes. The adhesive features water resistance and is designed to perform in wet or damp environments, making it suitable for bathrooms, kitchens, and other moisture-prone areas when used as directed.

Prepare a clean, dry substrate. Use the product as a ready-to-use adhesive and apply with a suitable notched trowel. Back-bedding or combing the adhesive helps achieve uniform transfer to the tile back. Place the tile, press firmly, and ensure consistent spacing. Allow the adhesive to set as per the product guidelines before grouting.

The product is described as ready-to-use. Follow the packaging instructions; generally, no extensive mixing is required beyond opening the bag and applying as directed. If your specific batch requires dilution or preparation, use only the method specified on the label.

Allow the adhesive to set adequately before grouting. Actual times depend on ambient conditions (temperature, humidity) and tile size. In typical conditions, plan for grout application after the adhesive has sufficiently cured as indicated on the product packaging.

Store the bag in a cool, dry place in its sealed packaging. Keep away from moisture, direct sunlight, and children. Use the contents within the recommended shelf life and keep the bag securely closed when not in use.

Avoid contact with skin and eyes; wear gloves and eye protection as needed. Ensure good ventilation during use. If contact occurs, rinse with plenty of water. If irritation persists, seek medical advice. Keep away from open flames as a precaution, even though the product is non-flammable. Refer to the Safety Data Sheet on the product page for full details.

Compliance and safety information are typically provided on the product label and the downloadable Safety Data Sheet (SDS) available on the product page. Check those resources for certifications, standards, and handling guidelines.

Asian Paints Berger SmartCare Tile Adhesive GP 20Kg is positioned as a high-strength, water-resistant option suitable for multiple substrates and both indoor wet and dry areas. For a direct, product-to-product comparison, you can review other tile adhesives on Fepy’s catalog pages and compare features such as bond strength, substrate compatibility, and pot life side-by-side.

Yes. Ensure the substrate is clean, dry, and free of dust. Use the appropriate notch trowel to achieve uniform coverage. Back-bedding can improve adhesion for larger tiles. Maintain even spacing between tiles, avoid excessive handling during curing, and follow the recommended grout timing after the adhesive has set. If you’re tiling in extreme conditions (very high humidity or heat), adjust work pace accordingly and follow packaging guidance.