Asian Paints Berger Solvalux 1000 Thinner, 18L, General-Purpose Industrial Thinner

It is suitable for thinning enamels, alkyds, acrylics, primers, and putties, and is also used for spray thinning. It can help improve flow, adhesion, and finish quality across a range of oil- and solvent-based coatings.

Solvalux 1000 Thinner offers high solvency, improved flow, and fast drying, with good compatibility for various coatings. It is formulated to provide effective dilution, clean brush/tool performance after painting, and overall burnish-friendly finishes. It is flammable and should be stored away from ignition sources.

Begin with a conservative dilution, typically about 5–10% by volume, and adjust as needed to achieve the desired viscosity for your coating and application method. Always follow the paint manufacturer’s recommended dilution guidelines and test on a small sample before full application.

Yes, Solvalux 1000 Thinner is suitable for spray thinning. Use the recommended dilution appropriate for your spray equipment and coating. Typical ranges are in the 5–15% by volume range, but always follow the coating manufacturer’s guidance and perform a test spray to dial in the parameters.

Use Solvalux 1000 Thinner to clean brushes, rollers, and spray equipment after painting. Rinse thoroughly with fresh thinner if needed and allow tools to dry completely before reuse. Dispose of used thinner according to local regulations.

Yes. It is a highly flammable solvent with vapors that can be hazardous. Use in a well-ventilated area, keep away from heat sources and ignition, wear appropriate PPE (gloves, eye protection, ventilation), and follow the SDS guidelines for storage and handling.

Store in the original container, tightly closed, in a cool, dry place away from heat, flames, and direct sunlight. Keep out of reach of children and pets, and follow any labeling and local regulations for storage of flammable liquids.

Dispose of empty containers and any leftover thinner according to local regulations for hazardous materials. Do not pour leftover thinner down drains or onto the ground. Use designated hazardous waste disposal facilities or recycling programs as advised by your local authority.

Fepy.com hosts a range of thinners and related solvents. For side-by-side comparison, you can browse the thinner category to see different options and their specs: https://fepy.com/search?q=thinner and https://fepy.com/search?q=solvent+thinner. You can filter by product type, consistency, and compatibility to find alternatives that best fit your coating system.

Consider the coating system you’re using (enamel, primer, putty, etc.), the required dilution, application method (brush, roller, spray), and the working environment. Compare pack sizes, price per liter, and the expected drying performance. Review the product page for any batch-specific details and ensure compatibility with your coatings.

Yes. Ensure surfaces are clean and dry before thinning, aerate the coating lightly to avoid air entrainment, and maintain proper ventilation during application. Use fresh thinner for cleaning and avoid over-thinning, which can lead to extended drying times or poor film formation. Always perform a small test area before full-scale use.