Asian Paints Berger 3.6L Stucco Extra Mix Co-polymer Based Filler - White

Common use cases include repairing cracks and dents in plaster or masonry walls, leveling rough surfaces prior to painting, and preparing both interior and exterior walls for a smooth, paint-ready finish in homes and commercial spaces.

Returns follow Fepy's general returns policy. Check the Returns page for eligibility and conditions: https://fepy.com/returns

For exterior masonry repairs requiring strong adhesion, this filler is a dedicated option. If you’re primarily working on interior walls, Berger Wall Putty is a common alternative. For small or hairline cracks, Berger Crack Filler is also available. See these alternatives on Fepy: Berger Wall Putty https://fepy.com/berger-wall-putty, Berger Crack Filler https://fepy.com/berger-crack-filler, Berger Stucco Patch https://fepy.com/berger-stucco-patch

Store in a cool, dry place with the lid tightly closed. Keep away from moisture. If the material dries out in the container, discard and start with a fresh tub.

Being water-based, it has low odor and is suitable for indoor use. Wear gloves, ensure good ventilation, and avoid prolonged skin contact.

Yes. Once fully dry, you can sand the surface to achieve a smooth finish before priming and painting.

Yes, it accepts paint. It is available in a range of colors to match common wall shades and can be tinted to achieve closer color matching.

It dries to the touch in a few hours, with full cure depending on thickness and climate. After it dries, you can sand the surface and apply primer and paint once the area is firm.

Yes. It is formulated to fill cracks, dents, joints, and uneven areas, helping to level the surface before painting.

Asian Paints Berger Stucco Extra Mix is a co-polymer based filler, providing excellent adhesion and durability for wall repairs.

Start with a clean, dry surface. Stir the filler to a creamy consistency and add a small amount of water if needed to reach a smooth paste. Apply with a putty knife or trowel, pressing into holes or cracks and smoothing flush with the wall. Let it dry, lightly sand for a fine finish, then prime before painting.

Asian Paints Berger Stucco Filler is a water-based putty designed to fill cracks, dents, and imperfections in masonry surfaces. It can be used on both interior and exterior walls to create a smooth, level surface that is ready for painting.

Yes, it features a low-odor, low-emission formula for a healthier work environment.

The filler is water-resistant, making it suitable for areas with moderate moisture exposure.