Asian Paints Berger 23kg Tuff AR Primer - White

The primer boasts superior spreading rates, excellent alkali resistance, and the ability to penetrate surfaces effectively. It is available in a white color and can be applied using brush, roller, or spray methods.

The primer can be applied using a brush, roller, or conventional spray equipment. For optimal results, it is recommended to thin the primer with sweet water at a ratio of 30-50% depending on the application method.

At 25°C, Tuff AR Primer becomes touch dry in about 2 hours, with a minimum overcoating interval of 24 hours. Drying times vary with temperature; for instance, at 35°C it dries in 1 hour.

Tuff AR Primer is suitable for application on concrete, plaster, masonry, brickwork, and blockwork. Its versatility makes it ideal for various construction materials.

Users should keep the primer out of reach of children and ensure adequate ventilation during application. Protective clothing such as gloves and goggles should be worn to avoid skin and eye contact.

The shelf life of Tuff AR Primer is up to 24 months from the date of manufacture when stored properly in cool, dry conditions.

It is not advisable to apply Tuff AR Primer when humidity exceeds 85% or when condensation is likely. The surface temperature should also be at least 3°C above the dew point to ensure proper adhesion and drying.

Asian Paints Berger Tuff AR Primer is a water-based primer designed to provide a strong surface bond with superior spread rate and alkali resistance. It prepares interior and exterior walls for topcoats, offering good adhesion on multiple substrates while helping to block moisture ingress.

It bonds well to drywall, concrete, masonry, brick, wood, and metal surfaces, making it suitable for a wide range of interior and exterior walls and substrates.

Yes. It is a water-based, solvent-free primer with alkali-resistant properties, making it safer for indoor use and easier cleanup compared to solvent-based primers.

All three methods are suitable. Apply in an even coat using a brush, roller, or spray, ensuring consistent coverage and avoiding heavy runs. Allow the primer to dry before applying the topcoat.

Berger Tuff AR Primer offers a superior spread rate. Coverage depends on substrate porosity and method of application, so check the product label for the typical coverage guidance on your chosen surface.

Yes. The AR (alkali-resistant) formulation is designed to resist alkaline substrates, helping to prevent bleed-through and ensuring better adhesion for the topcoat.

Yes. It is suitable for metal surfaces when proper surface preparation is performed (clean, dry, and free of contaminants) before applying the primer.