Asian Paints Berger Tuff Exterior Matt, 4L, Shade T314, Smooth Matt Finish, Easy Application

It is suitable for exterior masonry surfaces such as brick, concrete, plaster, cement render, and previously painted exterior walls. Always ensure the surface is clean, dry, and free from loose material before painting.

The Advanced Anti-Microbial Technology provides protection against bacteria and allergens, helping to maintain a healthier indoor atmosphere. The coating is non-sacrificial and designed to remain effective over time while being environmentally considerate.

Typically apply two coats for best coverage and protection. Allow the surface to dry to a recoat state, usually 4–6 hours between coats, depending on temperature and humidity.

Coverage depends on surface porosity and texture, but a general guideline is about 8–12 m² per liter per coat. For two coats on an average surface, a 4L can would cover roughly 32–48 m² total.

Yes. Start by cleaning the surface to remove dirt and dust, repair any cracks or damaged areas, and allow it to dry completely. For very bare or highly porous surfaces, some practitioners prime first; otherwise, you can proceed with the topcoat after proper cleaning.

This is a topcoat designed for exterior walls. A primer may be beneficial on very bare, porous, or chalky surfaces, but it is not always mandatory on sound, prepared surfaces.

Use a suitable brush or roller for exterior applications. Stir the paint well before use. This is a water-based formulation, so no thinning is required for standard applications; apply evenly with a wet edge to avoid lap marks.

The finish is washable with mild soap and water. Avoid using harsh solvents or abrasive cleaners that could dull the matte finish.

Yes. It is water-based and designed to be less hazardous to humans and the environment. Follow label instructions, use PPE as needed, and ensure proper ventilation during application.

Here are comparable options available on Fepy.com: - Asian Paints Berger WeatherCoat Exterior Emulsion 4L (URL: https://www.fepy.com/product/asian-paints-berger-weathercoat-exterior-emulsion-4l) - Outdoor durable matte finish with moisture protection; suitable for similar exterior surfaces. - Berger Weatherproof Exterior Emulsion 4L (URL: https://www.fepy.com/product/berger-weatherproof-exterior-emulsion-4l) - High resistance to weathering and dirt; good for harsh climates; slightly glossier finish than matte. - Nippon Paint Weather Shield Exterior Emulsion 4L (URL: https://www.fepy.com/product/nippon-paint-weather-shield-exterior-emulsion-4l) - Weather-resistant seal with anti-fungal properties; suitable for humid conditions and long-lasting protection.

Taupe T314 is the shade indicated for this product variant, providing a muted, earthy exterior look. Fepy’s catalog typically includes multiple color options in exterior matt lines, so you may explore other shades in the Berger exterior matte range if you want a different hue.

The combination of dirt repellence, moisture resistance, anti-fungal properties, and a non-sacrificial film contributes to long-lasting protection. Actual repainting intervals depend on climate, surface condition, and exposure; inspecting surfaces every few years helps determine if a fresh coat is needed.