Asmaco Gold PU Fire Retardant B1 Foam 750ml Pack of 12

Specifications: 750 ml per can, pack of 12. Key features include quick drying, moisture curing, a closed-cell structure that resists water absorption, good thermal insulation characteristics, and suitability for sealing high-volume, low-moment gaps. It’s described as safe and non-toxic for domestic and industrial use.

Shake well before use. Test on a small area first. Hold the can about 12–20 cm from the surface and apply in even coats. Use in a well-ventilated area and allow the foam to cure between layers if building thickness is needed. Avoid over-application to prevent sagging.

It’s indicated for metal surfaces (with corrosion-protection properties), and is generally applicable to other common substrates such as wood, plastic, and masonry. Always test adhesion on unfamiliar surfaces and follow safe surface preparation practices.

Compared with other general-purpose foam sprays on Fepy, this variant emphasizes quick drying, moisture curing, and enhanced sealing for high-volume gaps, while still offering corrosion protection on metal. For a direct comparison, you can check alternatives like: General-purpose foam spray 750ml at https://fepy.com/products/general-purpose-foam-spray-750ml and Industrial foam sealant 750ml at https://fepy.com/products/industrial-foam-sealant-750ml

Use cases include sealing and insulating high-volume, low-moment gaps around windows and doors, filling crevices in DIY projects, insulating and protecting metal surfaces from corrosion, and cleaning or detailing hard-to-reach areas where a foam spray can reach.

Use in a well-ventilated area, away from open flames. Wear protective gloves and eye protection. Avoid inhalation and skin contact. Store away from heat and direct sunlight. If the foam contacts eyes or skin, rinse with water and seek medical advice if irritation persists.

The pack of 12 offers a lower per-can cost and is convenient for multiple projects, ensuring you have a ready supply for sealing, insulating, and cleaning tasks without frequent repurchases. It’s typically more economical for larger DIY or industrial uses.

Store in a cool, dry place away from heat sources. Keep the can upright and away from direct sunlight. Empty cans should be disposed of according to local regulations; do not puncture or incinerate a pressurized can. Recycle where facilities permit.

Yes. Clean the surface to remove dirt, grease, and loose debris. For metal surfaces, ensure rust is addressed and the area is dry. If applying to porous materials, consider pre-drying or sealing as needed to achieve a stable base for the foam.

It’s described as effective for loosening dirt and grease on surfaces as well as sealing gaps, so you can use it for cleaning applications and then apply foam to seal or insulate adjacent gaps in the same project, following the recommended usage guidelines.

If you’re exploring similar options on Fepy, you can compare with: General-purpose foam spray 750ml at https://fepy.com/products/general-purpose-foam-spray-750ml and Industrial foam sealant 750ml at https://fepy.com/products/industrial-foam-sealant-750ml. These provide nearby capacities and different formulation emphases for comparison.