Name: Atlas PVC Elbow 90° 3/4", Solvent-Weld, Compact Turn, Easy Install
Brand: Fepy
SKU: 28126-NOS
Price: 2.00 AED
Availability: InStock

Question 1

What is the Atlas 90Deg PVC Elbow and what is it used for?

Accepted Answer

The Atlas 90Deg PVC Elbow is a PVC plumbing fitting that redirects flow by 90 degrees. It's designed for joining PVC piping in residential, commercial, and irrigation systems, helping you change direction in a clean, leak‑resistant manner.

Question 2

What size and pipe compatibility does this elbow offer?

Accepted Answer

This elbow is a 1-1/2 inch nominal PVC fitting and is intended for standard 1-1/2 inch PVC piping. The short description notes use with 2 inch piping contexts, so always confirm your system’s pipe OD (outer diameter) to ensure a proper slip fit with the matching socket size.

Question 3

What are the key material and durability traits of this elbow?

Accepted Answer

The elbow is made from PVC, which provides corrosion resistance and durability for a wide range of plumbing and irrigation applications. It is designed to withstand typical indoor and outdoor conditions found in residential and commercial water systems.

Question 4

What are common applications for the Atlas 90Deg PVC Elbow?

Accepted Answer

Common uses include residential plumbing runs, irrigation lines, and water-supply systems in both domestic and light commercial setups where PVC piping is standard. It’s suitable for directing flow around obstacles or changing the direction of a pipe run.

Question 5

How do I install this elbow correctly?

Accepted Answer

Typical installation involves preparing the pipe ends (cut square and deburred), dry-fitting to confirm alignment, cleaning the ends, applying PVC primer (where required by local code) and PVC cement to the pipe and fitting, then inserting the elbow and giving it a minor twist to ensure a full seat. Allow the joint to cure as recommended by the cement used and inspect for leaks after pressurizing the system.

Question 6

What safety and compliance considerations should I keep in mind?

Accepted Answer

Wear appropriate PPE (gloves and eye protection) when cutting and priming/cementing PVC. Ensure the fitting and adhesive choices meet local plumbing codes and are compatible with the fluid being carried. Verify that the material is suitable for potable water or chemical exposure as required by your project.

Question 7

How can I verify I’m choosing the right elbow for my system?

Accepted Answer

Check the pipe diameter and matching socket size (nominal size), confirm the 90-degree angle, and ensure the material (PVC) is compatible with the fluid and operating temperature. If you’re transitioning between sizes or attaching to other fittings, plan for appropriate adapters if needed.

Question 8

How does this elbow compare to other PVC elbows available on Fepy?

Accepted Answer

If you’re evaluating alternatives on Fepy, you can consider the following options alongside this Atlas elbow: Atlas PVC Elbow 90deg 2in for larger runs: https://fepy.com/product/atlas-pvc-elbow-90deg-2in and Atlas PVC Elbow 90deg 1in for smaller applications: https://fepy.com/product/atlas-pvc-elbow-90deg-1in. There’s also a universal 1-1/2in 90deg PVC elbow: https://fepy.com/product/pvc-elbow-90deg-universal-1-1-2in. These give you size and compatibility choices aligned with common PVC piping ranges.

Question 9

What makes this elbow a good value for my project?

Accepted Answer

PVC elbows like this Atlas fitting offer durable, leak‑resistant joints with relatively easy installation and broad compatibility for standard PVC systems. They help reduce leak points and support long‑term system reliability at a typically affordable price point.

Question 10

How should I maintain or inspect the elbow after installation?

Accepted Answer

Periodically inspect joints for any signs of leakage, cracking, or loosening. If a leak is detected, shut down the system, re-clean the joint, reapply primer and cement, reseat the fitting, and allow proper curing time before re‑pressurizing. Replace any cracked or damaged fittings promptly.

Question 11

Are there specific guidance or best practices for cementing and curing times with PVC fittings like this?

Accepted Answer

Use appropriate PVC primer (where required by code) and PVC cement designed for PVC piping. Apply evenly to both the pipe end and the fitting socket, insert fully, and give a brief twist to ensure a complete seat. Cure times depend on the cement and ambient conditions, so follow the product‑specific instructions on the adhesive container for safe handling and proper setting before pressurizing the system.

Question 12

Can this elbow be used in high-temperature or chemically aggressive environments?

Accepted Answer

PVC fittings perform well in many standard plumbing and irrigation applications, including cold or mildly warm water and common chemicals. However, they are not designed for high‑temperature service or aggressive chemicals beyond typical potable or irrigation use. Check your fluid’s chemical compatibility and operating temperature to ensure suitability.

Atlas PVC Elbow 90° 3/4", Solvent-Weld, Compact Turn, Easy Install

Features & Benefits

Specification

Attachments

Frequently Asked Questions