Atlas PVC Pipe 40mm × 6m Class 16, Solvent-Weld, Durable Wall, Low Head Loss

Class 16 indicates the pipe is intended for medium-pressure applications, providing reliable performance in typical water distribution and irrigation setups. It’s a balance between strength and ease of installation for everyday piping needs.

Key specs: 40 mm diameter, 6 m length, made from PVC material, Class 16 rating, solvent-weld joints, corrosion-resistant with a smooth interior surface for better flow.

Solvent-weld uses solvent cement to fuse the pipe to compatible fittings. You’ll need primer and cement, plus fittings such as elbows, tees, and couplers that match 40 mm PVC. Cut the pipe square, deburr the edge, dry-fit, apply primer and cement, then insert the fitting and hold until the joint sets.

Typical uses include medium-pressure water supply loops, pool plant connections, irrigation runs, and general drainage or distribution lines where a durable, easy-to-install PVC pipe is advantageous.

Steps: plan and measure the run, cut to length with a clean square cut, deburr the edge, dry-fit with fittings, apply primer and solvent cement, assemble and hold the joint until it cures, then pressure-test the line for leaks and secure with supports every so often along the 6 m length.

Wear eye protection and gloves when cutting and applying solvent cement. Ensure good ventilation when using primers and cement, avoid skin contact with solvents, and store materials away from heat and direct sunlight. Dispose of solvent waste according to local regulations.

PVC is corrosion-resistant and handles disinfectants and saline exposure well, making it a durable choice for coastal or chemically aggressive environments. This helps reduce premature failures compared with some metal options in such settings.

Regularly inspect for cracks or discoloration, flush lines if necessary, avoid bending tight radii that exceed recommended limits, and ensure joints remain properly solvent-welded. Proper installation and protection from UV exposure when not in use will help extend life.

This pipe is presented as a cost-effective, durable solution with easy installation. If you need to return it, follow Fepy’s return guidelines for unused items in original packaging within the applicable window, keeping in mind any condition requirements and restocking terms.

If you’re choosing between sizes, consider these nearby options on Fepy: 32mm × 6m Class 16: https://fepy.com/product/atlas-pvc-pipe-32mm-6m-class-16-solvent-weld ; 40mm × 6m Class 12: https://fepy.com/product/atlas-pvc-pipe-40mm-6m-class-12-solvent-weld ; 50mm × 6m Class 16: https://fepy.com/product/atlas-pvc-pipe-50mm-6m-class-16-solvent-weld. The 32mm option is smaller for tighter spaces, while the 50mm option supports higher flow, and the 40mm Class 16 sits in between for medium-pressure needs.