Atlas 90 Degree PVC Elbow - Per Pcs

Key specs: UPVC material, WRAS approved for potable water, 90-degree elbow, sold per piece, designed to withstand typical plumbing pressures and temperature variations, and suitable for indoor and outdoor use. It’s packaged piece-by-piece for easy installation.

WRAS approval indicates the product meets the UK water supply regulations for safe contact with drinking water. This means the elbow is approved for use in potable water systems and complies with safety and quality standards.

General installation steps: 1) select the correct size to match your pipe OD. 2) Cut the pipe to length and deburr the edges. 3) Dry-fit the elbow to ensure proper alignment. 4) Clean the pipe ends and apply PVC primer and solvent cement according to local code. 5) Insert the pipe into the elbow and hold for a short period to allow bonding. 6) Allow the joint to cure as recommended by the cement manufacturer before testing pressure.

Choose the elbow that matches the outer diameter (OD) of your tubing or pipe. This product is sold per piece and is available in multiple sizes on Fepy; verify the size in the product listing and pair it with compatible pipe sizes for a secure fit.

Common uses include plumbing connections, drainage runs, and ventilation piping in both indoor and outdoor settings. Thanks to UPVC material and WRAS approval, it is suitable for potable water lines as well as non-potable systems.

UPVC elbows are corrosion-resistant, lighter, and generally more cost-effective than metal elbows. They’re also easier to install with solvent cement and are suitable for many residential plumbing and drainage applications. For high-temperature or high-pressure scenarios, verify the specific limits of the UPVC variant you’re using.

Yes, UPVC elbows are designed for indoor and outdoor use where conditions are within their temperature and chemical resistance ratings. Ensure proper installation and protection from extreme UV exposure where applicable, and follow manufacturer guidelines.

This product is eligible for return according to Fepy’s standard policies. Please refer to the site’s return terms for conditions, timeframes, and any restocking fees that may apply.

Safety considerations include using appropriate PPE during cutting and fitting, ensuring depressurized and clean piping during installation, and using approved PVC cement and primer. The WRAS approval indicates it meets potable water safety standards, but always follow local codes and guidelines during installation.

Yes. For example, you can check similar UPVC/PVC 90-degree elbows on Fepy: 1) Upvc/PVC Elbow 90 Degree (URL: https://fepy.com/product/upvc-pvc-elbow-90-degree-1-2-inch) 2) WRAS Approved PVC Elbow 90 Degree (URL: https://fepy.com/product/wras-approved-pvc-elbow-90-degree-3-4-inch) 3) PVC Drain DWV 90 Degree Elbow (URL: https://fepy.com/product/pvc-dwv-90-degree-elbow-1-inch). Compare sizing, certification, and packaging to choose the best fit.

Warranty details are not specified here. If you need warranty information, please check Fepy’s product page or contact support for the specific terms related to this item.