Atlas PVC Female Threaded End Cap, 2", High Pressure

Atlas PVC End Cap seals the exposed end of PVC piping, protecting edges from dirt, moisture and damage. It offers heat, abrasion and chemical resistance, with good mechanical strength for durable, long-term use and quick, easy, per-piece installation.

The end caps come in multiple diameters to match different pipe outer diameters. To select the right size, measure your pipe’s outer diameter (OD) and choose a cap whose inner diameter closely matches that OD. Sizes are commonly listed in metric (e.g., 20mm, 25mm, 32mm) or imperial equivalents.

It is made from high-quality PVC, providing excellent abrasion resistance, good mechanical strength and toughness. This makes the cap durable, resistant to heat and chemicals, and suitable for protecting pipe ends in a variety of environments.

Installation steps: (1) clean and dry the pipe end; (2) verify fit with a dry press-fit test; (3) for a permanent fit, apply a compatible PVC solvent cement or adhesive around the pipe end and cap and press firmly into place; (4) hold until set according to the adhesive’s instructions; (5) allow to cure as directed before pressurizing or handling.

The cap provides a moisture barrier and edge protection, making it suitable for many indoor and outdoor uses. For long-term outdoor exposure, verify the product’s outdoor/UV suitability and consider additional protective measures if required by your environment.

Yes, the Atlas PVC End Cap is designed to fit standard PVC piping sizes. Make sure to match the cap’s inner diameter (ID) to your pipe’s outer diameter (OD) for a secure fit.

Measure the pipe OD with a caliper or ruler and compare it to the cap’s stated inner diameter. If you’re between sizes, choose the larger cap if it’s a slip-fit, or consult the size chart or customer support for guidance.

For variety, you can compare with these alternatives on Fepy: - Atlas PVC End Cap 25mm: https://fepy.com/product/atlas-pvc-end-cap-25mm-per-pcs - PVC End Cap Slip-On 25mm: https://fepy.com/product/pvc-end-cap-slip-on-25mm-per-pcs These options provide similar edge protection with different installation styles or sizes; check each product page for exact dimensions and compatibility.

Use cases include finishing and protecting exposed PVC pipe ends in DIY projects, plumbing or irrigation installations, commercial piping runs, workshop or lab setups, and any scenario where a clean, moisture-resistant pipe end is desired.

For a permanent fit, use a compatible PVC solvent cement/adhesive suited to your pipe size. Have cleaning cloths handy, wear gloves, and follow adhesive manufacturer guidance for curing times. For temporary or slip-fit installations, you may use the cap without adhesive if the fit is snug.

Handle PVC and any solvents with standard lab or workshop safety practices: use gloves, ensure good ventilation when using adhesives, and store away from heat. PVC materials commonly comply with broader safety standards (e.g., RoHS/REACH in many regions); always check the product’s spec sheet or certification details on Fepy for the exact compliance claims.

For return terms, please refer to Fepy’s Returns Policy on the site. Typically, returns are considered within the stated window with items in original condition and packaging; check the current policy for eligibility and any return shipping requirements.