Atlas PVC Pipe 3/4" × 6m Class E, Solvent-Weld, Compact Runs, Easy Install

Yes, the Atlas PVC Pipe is WRAS-approved, meaning it meets the standards for use in potable water systems. This certification ensures that the pipe is safe for drinking water applications.

The pipe is made from unplasticized polyvinyl chloride (UPVC), known for its durability and resistance to high pressures.

The Atlas (BS3505) 3/4" PVC Pipe has a pressure rating of 15 bar, making it suitable for high-pressure systems.

The pipe is designed for solvent weld connections, providing a strong and leak-proof joint when properly installed. It can also be used with rubber ring push-fit systems.

Yes, the Atlas PVC Pipe is versatile and can be used in both residential and industrial applications due to its high-pressure rating and chemical resistance. It is particularly effective in cold water services and drainage systems.

The standard colour for this pipe is dark grey, but it can also be customized according to customer requirements.

Atlas PVC Pipe Class E is a high‑pressure PVC pipe designed to meet BS3505 standards. It is WRAS approved for use with potable and non-potable water, making it suitable for industrial, hygienic, and water-supply installations. The product is available in multiple diameters (from 50 mm to 315 mm) and pressure ratings (4.0 to 12.5 bar), and is manufactured from high-grade PVC to resist mechanical impacts, chemicals, and pressure changes.

The Atlas Class E pipe comes in diameters ranging from 50 mm up to 315 mm, with pressure ratings from 4.0 bar to 12.5 bar. Sizes and pressure options vary by stock, so please check the listing for the exact options available when you purchase.

WRAS approval means the pipe is certified for use with potable water, ensuring it meets safety and quality standards for drinking-water systems. This makes it suitable for both potable and non-potable water applications in line with regulatory requirements.

This Class E pipe is designed for high‑pressure water transport in industrial, hygienic, potable and non‑potable water systems. Common applications include life‑support water distribution, snowmelt and stormwater systems, irrigation, trenches and culverts, as well as general industrial piping needs.

For installation: ensure you have the correct diameter and pressure rating, cut the pipe square and deburr the edges, then insert into compatible BS3505 Class E fittings using a vinyl solvent cement rated for PVC. Support the pipe at intervals to prevent sagging, align elbows and tees carefully, and avoid excessive bending. Allow the joint cement to cure as per the product and cement manufacturer's guidelines before pressurizing the system.

Class E is designed for higher-pressure and more demanding applications within BS3505 and is WRAS approved for potable and non-potable use. In general, Class D and Class A offer different balance points between pressure rating, wall thickness, and suitability for various fluids. For exact differences and to see available alternatives on Fepy.com, you can compare product pages such as Atlas Class D and Atlas Class A: https://fepy.com/product/atlas-pvc-pipe-class-d-bs3505-high-pressure-per-pcs and https://fepy.com/product/atlas-pvc-pipe-class-a-bs3505-high-pressure-per-pcs

Atlas Class E pipes comply with BS3505 standards and carry WRAS approval for potable water use. The combination of BS3505 compliance and WRAS certification helps ensure compatibility with drinking-water systems and resistance to typical chemical and mechanical stress in water pipelines.

Key specs to verify include the pipe diameter (50–315 mm), pressure rating (4.0–12.5 bar), BS3505 compliance, WRAS approval status, and the length per piece. Also check material quality (high‑grade PVC) and ensure you select matching Class E fittings for joint integrity.