Atlas UPVC Pipe 4" × 6m, 3.2mm, BS4514 - Per Pcs

Key specs: 4-inch diameter, 4-meter length, 2.2 mm wall thickness, smooth interior bore for low friction, weatherproof and UV-resistant, made from high-quality UPVC, and it aligns with BS standards for plumbing components (BS4514/BS5255 references appear in related documentation).

The pipe is weatherproof and UV-resistant, designed to withstand outdoor exposure and the chemical environment typically encountered in UAE buildings, ensuring durability in both indoor and outdoor drainage applications.

You can install this pipe using push-fit connections for quick assembly or solvent-weld joints for a more permanent fit. The smooth interior reduces friction, and the 4-meter length helps minimize joints during installation.

Best suited for soil and waste drainage, SWV stacks, and venting networks in residential or commercial settings. Its large 4-inch diameter supports high flow, ideal for bigger drainage runs.

Use compatible 4-inch UPVC fittings such as elbows, tees, couplings, and solvents cement/primer for solvent-weld joints, or push-fit couplings for quicker assembly. Ensure all fittings are rated for UPVC and meet local plumbing codes.

Compared with other 4'' UPVC pipes on Fepy, this Atlas pipe offers a 4-meter length with a 2.2 mm wall and a smooth interior, which can reduce the number of joints and improve flow. For example, other 4" options on Fepy may vary in length, wall thickness, or bore finish—check product pages for exact specs and compatibility with your fittings. See related alternatives: Atlas UPVC Pipe 4in-6m-32-wall (https://fepy.com/product/atlas-upvc-pipe-4in-6m-32-wall) and Atlas UPVC Pipe 4in-4m-22-wall-smooth (https://fepy.com/product/atlas-upvc-pipe-4in-4m-22-wall-smooth).

Maintenance is minimal. Periodically inspect for cracks or joint leaks, especially at joints. Clean the interior if there’s visible buildup and ensure joints remain tight. Avoid exposing the pipe to incompatible chemicals that could degrade UPVC over time.

This pipe is primarily designed for soil, waste, and vent (SWV) applications. It is not intended for potable water supply. Always verify local code requirements and compatibility with any specific fluids before installation.

The pipe combines durable UPVC material with a smooth interior bore and a relatively long 4-meter length to reduce joints, which can lower installation time and maintenance needs. Its corrosion resistance and UV stability contribute to long-term performance and cost efficiency in challenging environments.

For broader comparison, you can explore other 4'' UPVC piping options on Fepy, including alternatives with different wall thicknesses and lengths. Examples include Atlas UPVC Pipe 4in x 6m with a 3.2mm wall (https://fepy.com/product/atlas-upvc-pipe-4in-6m-32-wall) and Atlas UPVC Pipe 4in x 4m with a smooth bore (https://fepy.com/product/atlas-upvc-pipe-4in-4m-22-wall-smooth).