Atlas UPVC Pipe 6" x 6m x 3.2mm BS4514 - Per Pcs

- Material: UPVC (Unplasticized Polyvinyl Chloride) - Diameter: 6 inches (152.4 mm) - Length: 6 meters - Wall thickness: 3.2 mm - Standard: BS4514 - Fittings: High‑pressure, WRAS‑approved - UV and weather resistance: Yes - Weight: Lightweight for handling and installation - Ideal uses: Water supply, drainage, sewage, above and below ground installations

If you’re assessing options on Fepy, consider these alternatives: - Atlas BS4514 6in UPVC Pipe - 3m: offers similar diameter with a shorter length, which can be useful for shorter runs or tighter spaces. URL: https://fepy.com/product/atlas-bs4514-6in-upvc-pipe-3m - Atlas BS4514 4in UPVC Pipe - 6m: provides a smaller diameter option for lower flow requirements or tighter piping layouts, with the same BS4514 standard and WRAS fittings. URL: https://fepy.com/product/atlas-bs4514-4in-upvc-pipe-6m

Common use cases include: high‑flow water supply lines, above-ground and underground drainage, sewage conveyance, and any medium‑to‑large scale plumbing projects where BS4514 compliance and durable UPVC performance are required.

Installation steps: (1) Plan the run and verify fittings are compatible with UPVC. (2) Cut to length with a proper pipe cutter and deburr the edges. (3) Dry-fit to confirm alignment. (4) Apply UPVC solvent cement and primer to ensure a secure solvent-weld joint with compatible high‑pressure fittings. (5) Assemble, then perform a pressure test to check for leaks. (6) Support the pipe at appropriate intervals and consider burial depth if used underground. (7) For outdoor use, ensure UV exposure is accounted for and use appropriate protective measures.

Yes. It is BS4514 standard compliant and uses WRAS‑approved fittings, designed for safe, leak‑free operation in plumbing systems. The UV and weather resistance also support longer outdoor service life.

Consider the required flow, run length, and whether you need 6 meters per piece to minimize joints. The 6" diameter supports higher flow, reducing the number of joints. The extended 6 m length can lower installation time and cost. Also factor in the cost of compatible WRAS‑approved fittings and solvent cement, and any burial or outdoor protection requirements.

Yes. It is designed to work with WRAS‑approved high‑pressure fittings and standard UPVC connectors. For transitions to other materials (e.g., metal or different plastics), use appropriate adapters or transition fittings to ensure secure, code‑compliant connections.

For above-ground use, provide support brackets and avoid sharp bends to prevent sagging. For underground use, maintain proper burial depth per local codes, use buried-rated fittings, and provide trench backfill to minimize movement. Ensure joints are accessible for inspection and testing.

Yes. Wear appropriate PPE (gloves, eye protection). Cut pipes squarely and deburr edges to prevent injury and ensure clean joints. Use compatible UPVC primer and solvent cement in a well-ventilated area, and follow the manufacturer’s instructions for cure times before testing or filling the system.

If you need to adjust or return the item, check Fepy’s return policy for eligibility, conditions, and timeframes. When evaluating value, factor in the long service life, reduced joint points due to the 6 m length, and the reliability of BS4514 compliance and WRAS‑approved fittings.