Auger Drill Bit 22mm X 600mm

Diameter: 22 mm; Length: 600 mm; Intended for drilling into wood (soft and hardwoods); features a pointed starter tip and a spiral flute for debris removal; designed for use with standard drills.

If you need a larger hole, you might consider the 25mm x 600mm auger bit (https://fepy.com/products/auger-bit-25mm-600mm). For smaller holes, the 20mm x 600mm auger bit (https://fepy.com/products/auger-bit-20mm-600mm) is an option. The 22x600 variant offers a balance between hole size and drilling depth.

Use it for deep holes in wood such as cable passes, long dowel holes, furniture framing, cabinetry, or any project needing a clean 22mm hole up to 600mm deep.

1) Secure your workpiece with clamps. 2) Insert the bit into the drill chuck and tighten securely. 3) Start at a low speed and align the bit perpendicular to the work surface. 4) Apply steady, even pressure and let the bit do the cutting. 5) Withdraw periodically to clear debris.

Wear eye protection, secure the workpiece, keep hands away from the rotating bit, use appropriate drill speeds for wood, and avoid forcing the bit. Allow the bit to cool if it becomes heated.

Clean the bit after use to remove sawdust, store it in a protective case, avoid bending or dropping it, and apply a light oil if desired to reduce friction. If the tip or edges become dull, seek professional sharpening.

Yes. The product is described as suitable for drilling into both soft and hardwoods, thanks to its pointed tip and spiral flute design.

As a professional-grade auger bit designed for durability and deep, clean holes, it provides strong performance for demanding woodworking tasks and projects.

Start slowly to establish a clean center, maintain steady, perpendicular alignment, and avoid high feed pressure. If needed, pre-drill a small pilot hole to guide the bit and reduce tear-out.