Auger Drill Bit 25mm X 460mm

Diameter: 25 mm; Length: 460 mm; Material: high-quality steel; Construction: heavy-duty; Features a sharp cutting edge and a design aimed at reducing vibration and noise during drilling.

Best for wood, including softwood, hardwood, and wood composites. Not suitable for metal or masonry.

Secure your workpiece with clamps, insert the bit into a drill chuck that fits the shank, start at a low speed, feed steadily, and let the bit cut. Back out occasionally to clear chips and avoid overheating or binding.

After use, remove wood chips, wipe clean, and store in a dry place. Inspect the cutting edge for wear and dullness, and sharpen or replace as needed to preserve performance.

Yes, but sharpening a long auger bit is best performed by a professional or dedicated sharpening service. Use proper techniques and avoid overheating to maintain the edge.

On Fepy you can also find options like the 25 mm x 400 mm auger bit (https://fepy.com/product/auger-drill-bit-25mm-x-400mm) and the 26 mm x 460 mm variant (https://fepy.com/product/auger-drill-bit-26mm-x-460mm). The 460 mm length of this bit allows deeper holes, while shorter or slightly larger-diameter options offer different hole depths and flow of wood chips.

Ideal for deep dowel holes, hinge or drawer mounting holes, cabinet construction, and other woodworking tasks where clean, long holes are needed.

Use a drill with a chuck that accepts the bit’s shank and provides enough torque. A standard cordless or corded drill with a suitable speed range and steady control is recommended to prevent binding and ensure clean cutting.

Yes. Wear eye protection, clamp the workpiece securely, keep hands away from the cutting edge, avoid loose clothing or jewelry, inspect the bit for damage before use, and apply steady pressure with the bit doing the work rather than forcing it.

If you’re not satisfied with the performance, you can explore Fepy’s standard return options for unused items in their original packaging within the specified return window.