Auger Drill Bit 25mm X 500mm

Diameter: 25 mm. Length: 500 mm. Construction: high-quality steel for durability. Includes a convenient carrying case for storage and transport. Designed for smooth cutting and ease of use in wood.

This auger bit is optimized for wood. It’s best to use it on wooden workpieces and isn’t intended for metal, plastic, masonry, or other non-wood materials.

1) Secure your workpiece. 2) Insert the bit into the drill’s chuck and tighten firmly. 3) Align the bit perpendicular to the work surface. 4) Start at a low speed and apply steady, even pressure to avoid wandering. 5) Withdraw the bit periodically to clear chips and prevent binding. 6) Stop applying pressure once the hole depth approaches the bit length; then remove the bit slowly.

After use, clean off wood debris and wipe dry to prevent rust. Lightly oil the cutting edges if you store it for an extended period. Store the bit in the included carrying case to protect the cutting edge and prevent damage.

Yes. It features a standard shank designed to fit most corded and cordless drills with a compatible chuck size. Always ensure your drill can accommodate a 25 mm bit and the bit is securely clamped.

Wear protective eyewear and gloves, clamp the workpiece, keep hands away from the rotating bit, work at a controlled pace to avoid overheating, and clean chips frequently to reduce resistance and heat.

Compared to other sizes, the 25mm diameter is ideal for mid-sized holes in wood. For shallower or deeper holes, you might choose a shorter or longer bit. For different hole diameters, Fepy offers other auger bits such as 25mm x 400mm and 25mm x 600mm, which provide variations in length to suit your project depth. See these alternatives: https://fepy.com/product/auger-drill-bit-25mm-400mm and https://fepy.com/product/auger-drill-bit-25mm-600mm. For a different diameter, consider the 32mm x 500mm option at https://fepy.com/product/auger-drill-bit-32mm-500mm.

Choose 25mm when your project requires a mid-sized hole with a precise fit for standard hardware or dowels. The 500mm length is beneficial for deeper holes in woodworking, cabinetry, or door frames where longer reach and better chip evacuation are needed.

Its durable steel construction, 500mm length for deeper holes, and the included carrying case add convenience and longevity. The design aims to deliver clean cutting action with reliable performance for regular DIY woodworking tasks.

Ideal for furniture assembly, cabinetry work, installing dowels, making pilot holes for screws, and any project requiring a clean 25mm hole in wood with good reach and control.