Bison Kit Contact Adhesive, 650 ml, Original

This adhesive effectively bonds wood, board, veneer, plastic, metal panel boards (like HPL and Formica), rubber, leather, cork, canvas, and linoleum. However, it is not suitable for polystyrene foam (Tempex), polyethene (PE), polypropylene (PP), and vinyl.

Bison adhesive is moisture and frost-resistant, functioning effectively in temperatures ranging from -40 °C to +70 °C. This makes it versatile for both indoor and outdoor applications.

Surfaces must be dry, clean, dust-free, and grease-free for optimal bonding. It is recommended to degrease the surfaces beforehand to ensure the best results.

The coverage of Bison Super Strong Universal Contact Adhesive is approximately 2-2.5 m² per litre when applied on both sides. The exact coverage may vary depending on the nature of the materials being bonded.

Before use, stir the adhesive well and avoid dilution. Apply a coat on both substrates and allow it to dry for 10-40 minutes before joining them firmly. A second coat may be necessary for porous materials.

Wet adhesive residue should be removed immediately using a degreaser or thinner specifically designed for Bison Kit. Dried excess adhesive can only be removed mechanically or with a paint stripper after conducting a pre-test.

The adhesive should be stored in a cool and frost-free place with the container properly closed. Its shelf life is a minimum of 24 months if stored correctly.

The adhesive bonds wood, metal, leather, plastics, rubber, cork, canvas, and more. It is also ideal for repairing shoes, bags, toys, and carpets.

Yes, it is resistant to temperatures ranging from -40°C to +70°C.

The Bison adhesive bonds immediately upon application and is fast-drying for efficient use.

Yes, it is moisture and frost-resistant, making it suitable for outdoor applications.

The coverage is approximately 2-2.5 m² per liter when applied on both sides.

Yes, it is specifically designed for bonding materials under stress or requiring immediate processing.

A solid brush or fine-toothed glue spreader is recommended for even application on large surfaces.