Bosch 14" Cutting Disc 355 x 3.1 x 25.4mm

This disc is designed to cut metals, including steel and stainless steel, as well as other hard materials typically encountered in industrial and DIY metalworking projects.

Key specs: 355 mm (14\") diameter, 3.1 mm thickness (thin profile for fast cuts and reduced waste), 25.4 mm arbor, compatible with most angle grinders and designed for heavy-duty cutting tasks.

1) Ensure the tool is unplugged or powered off. 2) Remove the existing disc and install a compatible flange and nut for a 25.4 mm arbor. 3) Center the disc on the spindle and tighten securely. 4) Reinstall the guard and verify clearances before use. 5) Always run a light test cut away from your body before starting a full pass.

Wear safety glasses or a face shield, hearing protection, cut-resistant gloves, and long-sleeve clothing. Use a dust mask or respirator if cutting dusty materials, and ensure the work area is well-ventilated with appropriate guarding.

Use the correct feed rate—don’t force the grinder. Maintain steady, moderate speed, and apply even pressure. Avoid overheating the disc, check for cracks or damage before use, and ensure the grinder’s RPM rating is suitable for a 355 mm disc. Use proper guards and cooling as needed.

If you’re comparing, you can consider these similar options on Fepy.com: Bosch 14\" Cutting Disc 355 x 3.0 x 25.4mm (slightly thinner/3.0 mm)

Common use cases include cutting structural steel sections, pipes, plates, and other metalwork where a wide cutting surface and precise edges are needed. It’s suitable for fabrication, metalworking, and heavy-duty DIY tasks.

This disc is designed for machines with a 25.4 mm arbor and compatible flanges. Ensure your angle grinder supports a 355 mm wheel and that the guard and mounting hardware fit the disc securely before use.

A 3.1 mm thickness offers a balance between cutting speed, durability, and material waste. It provides strong performance for heavy-duty cuts while still maintaining a relatively thin profile for quicker, cleaner edges compared with thicker discs.

The Bosch brand is renowned for reliability, and the 355 mm diameter with a 25.4 mm arbor provides efficient cutting on large-scale metalwork. The 3.1 mm thickness offers a strong balance of durability and speed, making it a versatile choice for professionals and serious DIYers.

The disc is designed to meet industry safety expectations for abrasive cutting products and is tested for durability in demanding environments. Always follow operator safety guidelines and guard requirements when using the disc.