Bosch Pro F016800175 Tap Spool, 8mm

This spool is intended for Bosch grass trimmers that use the 8mm Pro Tap spool design. It’s crafted to fit the Pro Tap head systems commonly used on compatible Bosch models.

Key aspects include: 8mm line compatibility, Pro Tap spool design for quick loading, a durable construction, and an easy installation/reload process to minimize downtime.

1) Power off the trimmer and remove the battery or unplug if needed. 2) Open the trimmer head and remove the old spool. 3) Insert the new Pro Tap Spool into the head. 4) Ensure the line is properly threaded and extends to the cutting area. 5) Close the head, spin it to ensure smooth rotation, and power the trimmer back on.

Wind the line onto the spool evenly in the direction indicated on the spool. Leave a short tail to feed into the head’s channel. Thread the line through the trimmer head’s exit point, then reassemble the head and ensure the line feeds correctly when you operate the trimmer.

Keep the line and spool clean, avoid hitting hard objects that can crack or deform the spool, wind the line evenly to prevent tangling, and replace the spool if you notice visible wear or cracking.

Yes, when used as intended. Always disconnect power or remove the battery before servicing, wear gloves to protect your hands, keep bystanders away, and operate the trimmer at a controlled speed away from hard objects and debris.

It’s ideal for regular lawn maintenance, mowing through light grasses, and trimming around garden beds, edges, and tougher weed areas where reliable line feeding matters for a clean finish.

The 8MM Pro Tap Spool is designed for quick loading and reliable performance with Bosch 8mm heads. For alternatives, you can explore other Bosch 8mm spools on Fepy and compare loading ease, line strength, and compatibility at these product pages: https://fepy.com/product/bosch-8mm-pro-tap-spool-f016800174 and https://fepy.com/product/bosch-8mm-pro-tap-spool-f016800176

The number of loads depends on mowing frequency, vegetation density, and trimming habits. Lighter lawn use will yield more loads per spool, while dense weeds or tough growth will use line faster.

Double-check that the spool is properly seated, thread the line correctly, wind evenly, and test the head at low speed before full use. If the line feeds unevenly, recheck the alignment and re-thread from the start.