Bosch 2608680295 SDS Plus-1 Hammer Drill Bit 25 x 460mm - 1Pc

Diameter: 25 mm; Length: 460 mm; Shank: SDS Plus-1; Tip: carbide; Design features include high impact resistance and a fluted dust-removal path for smoother drilling; professional-grade Bosch construction.

It's ideal for drilling into concrete, masonry, and natural stone. The 25 mm diameter and long 460 mm reach are suited for deeper holes and larger-diameter openings.

SDS Plus-1 allows quick and secure engagement with SDS Plus hammer drills, providing efficient power transfer, reduced bit slippage, and easier bit changes in busy work environments.

Common uses include drilling deep holes for anchors, electrical conduits, plumbing runs, or any task requiring a deep, clean 25 mm hole in concrete, masonry, or stone.

1) Ensure your drill is in hammer mode and uses an SDS Plus chuck. 2) Insert the bit firmly until fully seated. 3) Start at a low speed and gradually increase, applying steady, axial pressure. 4) Use a pecking technique to clear debris and prevent bit overheating. 5) Withdraw the bit slowly to remove dust before pulling out completely.

Keep the bit cool by avoiding continuous heavy drilling without pauses, remove debris regularly, avoid side loading, and use appropriate drilling speeds for the material. Inspect the carbide tip for wear and replace if chipped or rounded.

This is an SDS Plus-1 bit designed for SDS Plus hammer drills. It will fit most SDS Plus hammers, but confirm your tool supports SDS Plus shanks and the bit length (460 mm) to ensure clearance and safe operation.

If you need alternatives with different reach or length, consider these on Fepy: Bosch SDS Plus-1 25x500mm: https://fepy.com/product/bosch-2608680298-sds-plus-1-hammer-drill-bit-25x500mm-1pc, Bosch SDS Plus-1 25x300mm: https://fepy.com/product/bosch-2608680293-sds-plus-1-hammer-drill-bit-25x300mm-1pc, and Bosch SDS Plus-1 25x600mm: https://fepy.com/product/bosch-2608680300-sds-plus-1-hammer-drill-bit-25x600mm-1pc. These differ mainly in length for deeper or shorter holes and may have slightly different drilling dynamics depending on your application.

Always wear appropriate PPE (safety glasses, hearing protection, gloves). Ensure the drill is off during bit changes, clamp the workpiece, and avoid drilling near live electrical components. Use the correct drill mode (hammer mode) and avoid applying excessive side pressure to prevent bit breakage or tool damage.

Store in a dry, clean area away from moisture and mechanical impact. Keep the bit in its protective case or a dedicated bit holder to prevent nicks or chipping of the carbide tip. Periodically inspect for wear and replace if the tip is damaged.

Its combination of 25 mm diameter, extra-long 460 mm reach, carbide tip, and SDS Plus-1 shank provides strong performance for deep, precise holes in concrete and masonry. The long length reduces the need for multiple bits on deep projects, and Bosch engineering ensures robust reliability and consistent drilling efficiency.