Bosch 06018C0100 GWS 2200-180H Professional Angle Grinder

Key specs include a 2200W motor, 230V operation, 180mm disc size, rigid metal gear housing for durability, an enhanced airflow cooling system to prevent overheating, a soft-start function for smooth startups, and a two-position side handle for better control and stability.

It excels at heavy grinding, fast material removal, large-diameter cutting, and surface preparation on metal and structural work. The 180mm disc size provides deep cutting capacity, making it a go-to for demanding fabrication and construction tasks.

First, unplug the tool. Use the spindle lock to hold the shaft, loosen the flange and remove the old disc. Place a new 180mm disc with the correct bore on the spindle, secure it with the flange and nut, reassemble the guard, and attach the two-position side handle as needed. Always ensure the guard is in place and aligned to deflect debris away from you. Then plug in and test at low speed before full use.

Wear eye protection (safety glasses or a face shield), hearing protection (earmuffs or plugs), protective gloves, and a dust mask or respirator when grinding. Use the protective wheel guard and ensure the work area is clear of bystanders.

Keep vents and cooling passages clear, regularly inspect the guard and handle for secure mounting, and clean off dust after use. If applicable, check carbon brushes for wear and replace as needed. Store the tool in a dry place to prevent corrosion.

Yes. With the 180mm disc, it’s suitable for both cutting and grinding applications. Be sure to use the correct disc type for your task and check that the disc’s RPM rating matches or exceeds the grinder’s operating speed.

This model offers a high-power 2200W motor with a robust metal gear housing and enhanced cooling, which provides strong performance for heavy-duty work. Lighter or lower-power 180mm grinders may be easier to handle for less demanding tasks or longer continuous use, but they typically deliver slower material removal and cutting depth.

Ideal for fabricating and preparing metal surfaces, cutting structural steel, deburring welds, heavy grinding on steel or cast iron, and removing rust or corrosion from large metal components in workshops and on job sites.

Use only 180mm discs designed for 180mm angle grinders with a compatible bore and mounting system. Ensure the disc is in good condition, not cracked or excessively worn, and that the guard is correctly installed to shield you from debris. Avoid using damaged or incorrect discs to prevent kickback or breakage.

When purchasing on Fepy, you can typically review the product’s return terms on the listing page. Consider the tool’s power, build quality, and long-term durability against its price point to gauge overall value for professional use.