Bosch S3 SDS Plus Drill Bit 5 x 110mm

Core specs include: SDS Plus shank for secure retention, carbide tip for longer life and toughness, 5 mm diameter for precision, 110 mm length for deeper holes, high drilling speed from an optimized flute design, and vibration reduction technology to reduce user fatigue during extended use.

Compatible with SDS Plus hammer drills that accept SDS Plus shanks. Examples include common professional impact/h hammer drills from brands that support SDS Plus systems. Always ensure your drill is configured for SDS Plus bits before use.

1) Make sure the drill is powered off. 2) Insert the SDS Plus bit into the chuck, pushing firmly until it seats. 3) Lock the bit by engaging the drill’s suitable hammer mode. 4) Start drilling at a low speed to establish the hole, then gradually increase speed while applying steady, moderate pressure. 5) If you feel binding or overheating, back out and allow the bit and material to cool.

Ideal for concrete, brick, and masonry. It’s not intended for metal or wood drilling. For best results in masonry, use a steady feed and allow the carbide tip to cut rather than rattle through the material, which reduces wear and prolongs bit life.

Use a compatible SDS Plus hammer drill in the correct mode, drill at appropriate speeds for the material, and avoid excessive force that can dull the carbide tip. Keep the bit cool by moderating drilling pace, and consider using a dust‑control setup to reduce debris buildup on the flute. Inspect the bit for wear and replace it if the carbide tip or shank shows damage.

If you’re choosing between sizes, consider hole diameter and depth required for your project. For quick comparisons on Fepy, you can view these alternatives: 6 x 110mm: https://fepy.com/products/bosch-sds-plus-drill-bit-6x110mm, 4 x 110mm: https://fepy.com/products/bosch-sds-plus-drill-bit-4x110mm, and 5 x 82mm: https://fepy.com/products/bosch-sds-plus-drill-bit-5x82mm. The 6x110mm will create larger, deeper holes, while the 4x110mm and 5x82mm offer smaller or shallower options for different tasks.

Common use cases include drilling anchor holes for concrete or masonry walls, creating openings for conduit or piping, installing wall anchors for heavy fixtures, and general renovation tasks where precise, deeper holes are required in hard materials.

Yes. Wear eye protection, hearing protection, and a dust mask as appropriate. Secure the workpiece, avoid loose clothing or jewelry, and keep hands away from moving parts. Inspect the bit for damage before use; a damaged carbide tip or bent shank should be replaced to prevent failure during drilling.

Choose the diameter based on the hole size needed for your anchor or fastener. The 5 mm diameter is ideal for medium holes in concrete and masonry, with 110 mm length enabling deeper penetration. Bosch tooling is known for carbide‑tip durability, precise tolerances, and SDS Plus reliability, offering long‑term value for professionals and DIYers who require consistent results.

Fepy generally supports returns on eligible items. If you need to return this drill bit, ensure it’s in unused, original condition and contact Fepy within the return window specified in their policy. The process typically covers refund or exchange options depending on the condition and timing of the return.