Bosch 2608680271 Hammer Drill Bit 8 x 150 x 210mm

8 mm diameter; 150 mm working length; 210 mm total length; carbide tip for durability; designed for hammer drill use to handle tough materials with clean, accurate holes.

It’s designed for hammer drills and is suitable for drills that accept an 8 mm drill bit. Ensure your tool’s chuck size and shank type match the bit for best results.

Drilling holes for anchors and fasteners in concrete, masonry and stone surfaces, including walls, floors and structural elements—especially where a longer reach is advantageous.

1) Ensure the drill is off and the bit is clean. 2) Secure your workpiece. 3) Start drilling at a low speed with light pressure to establish the hole. 4) Gradually increase speed and pressure while keeping a steady feed. 5) Periodically withdraw the bit to clear debris and cool it. 6) Stop when you reach the desired depth and deburr the hole if needed.

Wipe away dust after use, keep it dry to prevent corrosion, and store in its protective case or a designated organizer to prevent bending or dulling of the carbide tip. Avoid unnecessary bending or dropping.

Its carbide tip delivers superior strength and longevity under tough drilling conditions, and the 210 mm total length provides added reach for deeper holes, enabling faster, more efficient drilling in concrete and masonry.

On Fepy, you can also consider these similar Bosch 8 mm options: Bosch 2608680270 Hammer Drill Bit 8 x 150 x 210 mm at https://fepy.com/product/bosch-2608680270-hammer-drill-bit-8x150x210mm and Bosch 2608680272 Hammer Drill Bit 8 x 150 x 210 mm at https://fepy.com/product/bosch-2608680272-hammer-drill-bit-8x150x210mm. The alternative options may vary in length or tip geometry, so compare total length, working length and tip durability to choose the best fit for your project.

Yes. Always wear eye protection and a dust mask as needed, secure the workpiece, keep hands away from the rotating bit, use proper PPE, and ensure the drill is off when changing bits. Maintain a steady feed and avoid overheating the tip.

If you’re drilling 8 mm holes into concrete, masonry or stone and need a reliable bit with good reach (210 mm total length), this Bosch bit offers durable carbide performance and efficient drilling. The longer length reduces the need for extensions and speeds up deeper drilling tasks, often translating to time savings on demanding jobs.

Consider other 8 mm variants and longer/shorter options in the Bosch drill bits family to cover different hole depths and materials. You can browse related Bosch drill bits in Fepy’s Bosch drill bits category: https://fepy.com/category/bosch-drill-bits

It’s optimized for concrete, masonry and stone due to the carbide tip and robust design. While it performs well on these materials, for very hard or ceramic tile surfaces you may want to use specialized tiles bits or pilot holes to minimize cracking. Always match drilling technique to the material and use appropriate PPE.