Bosch PTW1607200200 Switch for GWS 14-125 CIF Angle Grinder

- High-quality construction for durability under heavy use - Easy installation for minimal downtime - Precise operation to ensure accurate control - Enhanced safety with reliable start/stop behavior - Compatibility designed specifically for GWS 14-125 CIF - Reliable switching for uninterrupted operation - Cost-effective maintenance by restoring tool function - Built to withstand the demands of high-performance grinding

This switch is designed specifically for the Bosch GWS 14-125 CIF model. While it may physically fit other Bosch tools, compatibility isn’t guaranteed, so it’s best to use it with the GWS 14-125 CIF as intended.

General guidance for replacement: 1) Unplug the grinder and remove any accessible power source. 2) Open the tool housing by removing the screws. 3) Locate the old switch and carefully disconnect the wires. 4) Connect the wires to the new switch following the original wiring order. 5) Reassemble the housing and secure all screws. 6) Reconnect power and test the trigger to ensure smooth on/off operation.

Power off, then reconnect power and briefly operate the switch to verify on/off function. Check for smooth engagement without sticking or sparking. If the grinder starts reliably when switched on and stops promptly when off, the switch is functioning correctly.

Indications include intermittent or no response when pressing the trigger, intermittent starting, delayed or no startup, erratic behavior, or unusual warmth around the switch during use.

Professional metal fabrication and grinding tasks, workshop maintenance, and any DIY projects that use the GWS 14-125 CIF grinder. A reliable switch helps maintain control, safety, and productivity in everyday grinding tasks.

Always unplug the tool before starting. Use insulated tools, work in a dry environment, and handle wiring with care. Ensure the power is completely disconnected during replacement and avoid twisting or pinching wires during reassembly.

If you’re exploring alternatives, you can consider other Bosch GWS 14-125 CIF switch options available on Fepy.com, such as the PTW1607200100 and PTW1607200300 variants, which are also designed for similar GWS models and provide reliable performance. See: https://fepy.com/product/bosch-ptw1607200100-switch-gws-14-125-cif-angle-grinder and https://fepy.com/product/bosch-ptw1607200300-switch-gws-14-125-cif-angle-grinder.

Yes. The PTW1607200200 is described as a genuine replacement switch designed for the Bosch GWS 14-125 CIF, ensuring compatibility and maintaining Bosch’s original performance standards.

Typically you’ll receive the replacement switch unit itself ready for installation. Some listings may include basic mounting hardware or connectors if specified in the product description.

Keep the grinder clean and dry, avoid exposing it to moisture or dust during use, inspect wiring during routine maintenance, and ensure the switch is used within its rated load. Regular inspection of the trigger and electrical connections helps catch issues before they cause failures.