Bosch T101A 4" 14 TPI Special For Plexiglas T-Shank Jig Saw Blades - 5 Pcs/Set

They’re optimized for Plexiglas and acrylic sheets and handle plastics from about 5/64 inch up to 3/4 inch thick. For thinner plastics you’ll get faster cuts; for thicker pieces, cut more slowly to maintain edge quality.

T-shank blades are the most common blade design for jig saws and offer a secure grip. These blades are designed to fit a wide range of jig saws with T-shank blades, covering roughly 90% of current models. Always check your tool’s blade adapter or clamp to confirm compatibility.

A 14 TPI tooth pitch provides a balance between smoothness and cutting speed, producing cleaner edges on plastics with reduced chipping. It’s fine enough to minimize splintering while still cutting efficiently.

Yes. They’re ideal for straight cuts in Plexiglas, and they can handle gentle curves as well. For tight curves, you might prefer a blade with a different tooth geometry or a finer pitch.

The pack contains 5 blades, providing multiple sharp blades for extended use. This offers good value for projects that require repeated cuts or working on multiple pieces without waiting to resharpen.

1) Unplug the tool. 2) Loosen the blade clamp. 3) Insert the blade into the clamp with the teeth facing forward and the blade shank fully seated. 4) Tighten the clamp securely and test on scrap material before cutting.

Use a backer board or sacrificial layer under the Plexiglas, apply masking tape along the cut line to reduce tear-out, clamp the workpiece securely, start with a light scoring cut if possible, and feed the blade steadily at a moderate speed to avoid overheating and edge damage.

Wear eye protection and a dust mask as needed, secure the workpiece with clamps, keep hands away from the blade, unplug the tool when changing blades, and avoid forcing the blade through material. Work in a well-ventilated area to manage plastic fumes or dust generated during cutting.

For Plexiglas and plastic-focused cuts, you can compare with these on Fepy: Bosch T1011 4" 10 TPI T-shank Jig Saw Blades (5 pcs) at https://fepy.com/product/bosch-t1011-4-10-tpi-t-shank-jig-saw-blades-5-pcs, Bosch T118B 4" 24 TPI Jig Saw Blades for Plastic at https://fepy.com/product/bosch-t118b-4-24-tpi-jig-saw-blades-5-pcs, and Diablo D1050C 4" 10 TPI Jig Saw Blades at https://fepy.com/product/diablo-d1050c-4-10-tpi-jig-saw-blades-5-pcs. These offer different tooth pitches and materials suitability, so choose based on edge quality and material thickness.

Store blades in a dry, clean container or blade case to prevent corrosion and dulling. Clean any plastic residue after use, avoid overheating the blade during cuts, and substitute a new blade when you notice chipped teeth or excessive resistance. Keeping blades dry and unbent helps maintain performance over time.

While they’re optimized for Plexiglas and plastics, you may get usable results on some soft plastics. For other materials like wood or metal, use blades specifically designed for those substrates to ensure clean cuts and blade longevity.