Name: 1/2" x 10mm C.P Extension Nipple
Brand: Fepy
SKU: 12678-NOS
Price: 1.00 AED
Availability: InStock

Question 1

How do I install a C.P Extension Nipple?

Accepted Answer

General installation steps: 1) Shut off water and relieve pressure. 2) Clean the threads of both pipes. 3) Wrap the male threads with PTFE thread sealant tape (or use appropriate sealant). 4) Thread the nipple fully into the mating female end or coupling. 5) Tighten with a wrench until snug, avoiding overtightening. If using a plain-end variant, pair it with the correct coupling or fitting.

Question 2

Is it safe to use a C.P Extension Nipple under high pressure or with hot water?

Accepted Answer

Usage under pressure and with hot water depends on size, threading, and the specific material finish. Check the product’s technical specifications for pressure ratings and temperature suitability, and do not exceed the recommended limits for safe operation.

Question 3

What is Fepy’s return policy for this item?

Accepted Answer

If you’re not completely satisfied with your purchase, you can review Fepy’s return terms on the product page or the Returns section of the site for details, including eligibility and the process to initiate a return.

Question 4

What should I know about price and value when selecting this fitting?

Accepted Answer

Prices vary by size, finish, and end configuration. The value comes from selecting the right size and configuration to minimize extra fittings and ensure a reliable seal. Compare options within the same size range and finish to determine the best balance of cost and durability.

Question 5

How do I choose the right size and configuration for my project?

Accepted Answer

Measure the diameter of the pipe you’re connecting and identify the thread type (male/female) or plain end needs. Consider the space available for installation and the desired flow path. Matching the correct size and end configuration will minimize the need for additional fittings and reduce potential leak points.

Question 6

What similar products on Fepy.com should I consider as alternatives?

Accepted Answer

If you’re exploring options, you might compare with other CP extension nipples in different sizes or plain-end variants available on Fepy. Suggested alternatives include: 1) CP Extension Nipple (1/2 inch) - https://fepy.com/product/cp-extension-nipple-1-2-inch-threaded 2) CP Extension Nipple (3/4 inch) - https://fepy.com/product/cp-extension-nipple-3-4-inch-threaded 3) CP Extension Nipples with Plain End - https://fepy.com/product/cp-extension-nipple-plain-end

Question 7

How should I maintain and inspect it to prevent leaks?

Accepted Answer

Regularly inspect for signs of corrosion, wear, or leaks around threaded joints. Keep threads clean and dry when not in use, re-torque as needed after initial operation, and replace the nipple if threads show damage or corrosion to maintain a reliable seal.

Question 8

What are common use cases for a C.P Extension Nipple?

Accepted Answer

Typical uses include bridging two pipes that have different diameters, enabling a quick connection in tight spaces, retrofitting or extending piping in plumbing projects, and adapting fittings where space or diameter constraints exist.

Question 9

Can I use O-rings, washers, or gaskets with a C.P Extension Nipple to improve the seal?

Accepted Answer

Some configurations can benefit from additional sealing components like O-rings, washers, or gaskets. The product line notes that such accessories may be available to enhance performance, but availability varies by size and type—check the specific listing or accompanying accessories for your chosen nipple.

Question 10

Do these nipples use a specific thread standard (NPT vs BSP), and how do I know if they fit my pipes?

Accepted Answer

Yes—these fittings come in different thread standards. Before purchasing, identify your system’s thread standard (such as NPT or BSP) and select a nipple that matches. Using the wrong standard can cause leaks or improper fit, so double-check the product specifications and your existing pipes.

Question 11

What are the dimensions of this extension nipple?

Accepted Answer

It measures 1/2 inch in diameter with a 10mm length, suitable for plumbing extensions.

Question 12

What sizes and end configurations are offered?

Accepted Answer

C.P Extension Nipples come in a range of nominal sizes and end configurations. They’re available in threaded variants (both male and female) as well as plain-end configurations to suit different installation needs. Check the product size chart on the listing for exact options.

Question 13

What materials is it made from, and is it corrosion resistant?

Accepted Answer

It is constructed from durable steel, and the CP designation typically indicates a chromium-plated finish for added corrosion resistance. This makes it suitable for many plumbing environments, though always verify compatibility with your specific water or fluid profile.

Question 14

What exactly is a C.P Extension Nipple and what is it used for?

Accepted Answer

A C.P Extension Nipple is a steel plumbing fitting designed to connect pipes of two different diameters. It features male and female threads (or a plain end option) to enable quick, secure connections between mismatched pipe sizes in plumbing systems.

Question 15

How durable is this extension nipple?

Accepted Answer

The chrome-plated brass construction ensures high durability and resistance to rust and corrosion.

1/2" x 10mm C.P Extension Nipple

Features & Benefits

Specification

Attachments

Frequently Asked Questions