Carl Disk Cutter, A4 Size, Ideal for High-volume Cutting - Cuts up to 32 Sheets

It can cut up to 32 sheets of standard A4 paper in a single pass. A4 size is 210 x 297 mm, and the cutter includes adjustable guides to help align sheets accurately.

The steel disk blade is designed to deliver crisp, even cuts with minimal fraying, giving you professional-looking results on large batches of paper.

It includes a protective blade guard to keep fingers away from the cutting edge and a stable base to reduce movement during cutting, improving overall operator safety.

Power off the unit, remove the blade guard as instructed in the manual, replace the disk blade with a compatible replacement, reassemble securely, and test with scrap sheets to verify alignment and performance.

The package typically includes the Carl CL-DC-210N Disk Cutter, a blade guard, and a user manual to guide setup and operation.

This model is designed for standard paper cutting and should not be used with plastics, laminates, or heavier materials that exceed its design capacity.

Place the cutter on a flat, stable surface, adjust the paper guides to the A4 size, load the stack evenly, engage the blade guard, and smoothly slide the disk blade through the stack while keeping fingers clear of the cutting edge.

The CL-DC-310N is a higher-capacity model designed for even larger volumes, enabling more sheets per cut and typically a larger footprint. If you frequently exceed 32 sheets per cut, the 310N would be more suitable. Product page: https://www.fepy.com/product/carl-disk-cutter-cl-dc-310n

The CL-DC-110N targets lower-volume tasks with a smaller cutting capacity and footprint. For higher-volume work, the CL-DC-210N provides greater efficiency and capacity. Product page: https://www.fepy.com/product/carl-disk-cutter-cl-dc-110n

Ideal for offices handling large batches of reports, school administrations compiling packets, and print shops producing multi-page handouts where consistent, edge-to-edge cuts are important.

Yes. Regularly dust the area around the blade, wipe down surfaces, avoid moisture, store with the blade guard engaged, and periodically inspect the blade for wear to ensure consistent cuts.