Carl Male Die for No.123 Heavy-Duty Punch

This die is engineered for use with a variety of materials and is optimized for high-precision punching. For best results, use it on compatible materials and follow standard setup practices to ensure clean cuts and consistent hole quality.

This die is designed specifically for the Carl No.123 Heavy-Duty Punch. It is not intended for use with other Carl punch models.

To replace the die: 1) Power off and disconnect the machine. 2) Remove any securing screws or fasteners holding the old die. 3) Align the new ZCL-MD123 die with the punch alignment marks. 4) Secure it firmly with the screws and recheck alignment. 5) Reconnect power and perform a test punch to verify proper seating and accuracy.

Key specifications include: precision punching for consistent results, sturdy construction for long life, a perfect fit designed specifically for the Carl No.123 Heavy-Duty Punch, easy replacement with straightforward installation, and high efficiency for frequent use.

Keep the die clean and free of debris, inspect for wear or burrs before each use, lightly lubricate mating threads or fasteners as recommended, and store in a dry, protected area when not in use to prevent corrosion.

Always power down the press before installing or removing the die. Wear appropriate PPE (eye protection and gloves), ensure material is securely clamped, verify alignment before punching, and avoid overloading the punch to prevent die damage or injury.

This die is ideal for high-volume hole punching tasks where precision and repeatable results are important. It is commonly used in processes that require consistent hole placement and clean cuts across compatible materials, optimized for frequent use with the No.123 Heavy-Duty Punch.

Compared to the No.124 and No.125 Carl dies, the No.123 die is tailored for the No.123 Heavy-Duty Punch with a precise fit and alignment specifically for that model. If you’re evaluating options, consider these alternatives on Fepy to see which model matches your punch hardware and production needs: No.124 Die for Carl No.124 Heavy-Duty Punch (https://fepy.com/product/carl-no124-die-heavy-duty-punch-zcl-md124) and No.125 Die for Carl No.125 Heavy-Duty Punch (https://fepy.com/product/carl-no125-die-heavy-duty-punch-zcl-md125).

Store the die in its protective packaging or a dedicated storage tray, in a dry environment away from moisture and dust. Keep it out of direct contact with other metal parts to prevent scratches and burrs.

Signs of wear include deteriorating punch alignment, increased burrs on punched holes, visible wear on the die face, or looseness in the die mounting. If you notice reduced punch accuracy or inconsistent hole quality, consider inspecting or replacing the die.

Yes. Start with clean, properly aligned punch, ensure the die is securely mounted, and verify material alignment with the punch path. Run a few test punches on sacrificial material to confirm consistent hole placement, then proceed with production. Regularly check alignment and re-tighten fasteners to maintain accuracy.