Cold Bitumen Non Fibrated Damp Proof 200L

Non-fibrated means the bitumen coating does not contain added fibers. This typically results in a smooth, continuous film that remains flexible, offers reliable damp protection, and is easy to apply without clumping or fibre-related texture issues.

Key features include: ready-to-use cold bitumen damp-proof coating, water-impervious film formation, UV resistance, stability under temperature fluctuations, lightweight and easy to handle, no heating or mixing required, and suitability for both indoor and outdoor use.

It's versatile for structural waterproofing: underpinning foundations, stem walls, slabs, steps, pool areas, and other areas prone to damp or water ingress. It remains effective under normal building movement and is resistant to acids, alkalis, and UV exposure.

Steps: 1) Prepare the surface (clean, dry and free of debris). 2) Open the 200L container and stir as needed. 3) Apply a uniform coating using a brush, roller, or suitable spray method. 4) Allow the film to dry and inspect for any missed spots. No heating or mixing is required, and tools can be cleaned with appropriate solvents after use.

The product is designed to be non-toxic and non-flammable. Wear appropriate PPE (gloves, eye protection, and ventilation) during application. Store in a cool, dry place away from direct heat or open flames. Follow local regulations for disposal of any excess material and containers.

Application creates a flexible waterproof film as soon as the coating dries. Curing time depends on ambient temperature and humidity; higher temps typically speed drying. The film remains flexible and resistant to typical temperature fluctuations once cured.

Coverage depends on the required film thickness and surface condition. For planning, treat it as a uniform coating across the prepared surface, following project specifications and deemed thickness. Do not apply irregularly or in multiple inconsistent layers unless recommended by project guidelines.

Compared to other damp-proof options, Cold Bitumen Non Fibrated Damp Proof 200L offers a ready-to-use, no-mix solution with a flexible film for damp protection. For alternatives with different volumes or application methods on Fepy.com, you might consider: • Cold Bitumen Damp Proof (100L) — https://fepy.com/product/cold-bitumen-damp-proof-100l • Liquid Damp Proof Coating (20L) — https://fepy.com/product/liquid-damp-proof-coating-20l • Bitumen Emulsion Damp Proof (500ml) — https://fepy.com/product/bitumen-emulsion-damp-proof-500ml These options provide similar waterproofing capabilities at different scales or application modes.

It's ideal for challenging damp-prone areas such as basements, underpinning foundations, stem walls, slabs, steps, and pool surrounds. It’s also suitable for both indoor and outdoor application areas where a durable, corrosion-resistant damp-proof layer is required and where heating or mixing would be impractical.

The product delivers a durable waterproof coating with resistance to UV and chemical exposure. Use in accordance with local building codes and safety guidelines. Store and dispose of containers per local regulations, and refer to the product’s safety data sheet (SDS) for detailed handling, storage and disposal instructions.

Yes, it offers a ready-to-use, low-maintenance waterproofing solution that eliminates heating or mixing costs and reduces installation time. When evaluating value, consider the 200L drum’s coverage, the need for a flexible damp-proof film, potential labor savings, and the material’s durability under your project conditions. If you anticipate large-scale or repeated damp-proofing needs, the 200L option can be cost-effective over alternative smaller-volume products.