Cosmoplast UPVC Double Y, 110mm, Dual-Branch Drain Connector for Sewer & Waste Lines - Grey

Specifications: material is UPVC, size is 110mm, color grey, double Y (two branches from a main line), corrosion and UV resistant, lightweight and designed for easy solvent-welding connections in plumbing systems.

A double Y fitting provides two branch connections from a single main run, enabling two downstream lines to join or split from one point. Use it when you need two separate branches off a main 110mm line in drainage or plumbing layouts, offering a compact alternative to multiple fittings.

Ideal for residential and commercial drainage or water‐distribution setups where two branches need to join or split from a 110mm main line, such as connecting multiple drain lines, diverting flow, or extending a main run to two outlets.

Installation steps: 1) Cut the 110mm pipes squarely and clean the ends. 2) Dry-fit to check alignment. 3) Apply UPVC primer to the pipe ends and the socket of the fitting. 4) Apply solvent cement to the primed areas. 5) Insert the pipes into the fitting with a quarter-turn to ensure a secure bond. 6) Wipe away excess cement and allow it to cure before pressurizing the system.

You’ll need a cutter or saw for 110mm pipe, a marker, a clean cloth, UPVC primer, solvent cement, a measuring tape, and PPE (gloves and eye protection). Ensure pipes are clean, dry, and free of debris before joining.

Maintenance is minimal: keep the fitting clean, check for any signs of cracking or loosening after installation, and ensure joints remain fully cured and free from leaks. Replace any damaged components promptly to maintain system integrity.

UPVC fittings like this are widely used in plumbing systems, including potable water in many jurisdictions. Always verify compatibility with local codes and the specific potable water requirements in your area before use.

If you’re exploring options, you can consider these similar fittings on Fepy: 1) Cosmoplast 110mm UPVC Single Y Grey — https://fepy.com/product/cosmoplast-110mm-upvc-single-y-grey 2) Cosmoplast 110mm UPVC Tee Grey — https://fepy.com/product/cosmoplast-110mm-upvc-tee-grey 3) Cosmoplast 75mm UPVC Double Y Grey — https://fepy.com/product/cosmoplast-75mm-upvc-double-y-grey

Key considerations: correct size (110mm), material (UPVC) for compatibility with your pipes, color (grey) to match or code with your system, the double Y configuration for required branching, and budget. Compare durability, ease of installation, and compatibility with your piping system to assess overall value.

Follow standard PPE and solvent-welding safety: wear gloves and eye protection, work in a well-ventilated area, ensure pipes are clean and free of burrs, and allow joint cement to cure fully before pressurizing the system. Avoid damaging pipes and fittings during cutting or fitting placement.