Crane Gate Valve PN20 1", Robust Shut-Off, Maintenance-Friendly, Reliable Seal

Key features include a full bore design to minimise pressure drop, a non-rising stem for space efficiency, a raised wheel for smooth operation, a serviceable bonnet for maintenance in humid or coastal environments, corrosion-resistant brass body, and threaded ends for quick retrofits.

PN20 rating up to 20 bar, 1-inch size, rugged brass body, non-rising stem, smooth operation wheel, full bore flow path, threaded ends, and versatility for water, oil, and non-aggressive fluids.

It is designed for potable water, chilled water, and other non-aggressive fluids in low-pressure utility lines, with suitability for water-based applications and coastal environments due to its corrosion-resistant materials.

Since it has threaded ends, ensure the piping is threaded and compatible. Apply an appropriate thread sealant or PTFE tape suitable for water systems, align the valve with flow, hand-tighten first, then use proper tooling to snug it without over-tightening. Provide adequate support and ensure space for bonnet access for maintenance.

Turn the wheel counterclockwise to open and clockwise to close. The full turn movement provides positive shutdown, and the non-rising stem keeps the installation compact while allowing straightforward operation and service checks.

Periodically inspect the bonnet for leaks, ensure smooth stem movement, and check the wedge and seals for wear. If operation becomes stiff or leaks appear, service or replace worn components per the manufacturer guidelines to maintain reliability.

Yes. The brass body and internal components are designed for potable water use, with corrosion resistance suitable for humid or coastal plantrooms. Always verify local codes and project specifications to ensure compatibility.

Ideal for pump bypasses, branch isolation, and equipment tie-ins where dependable sealing and long service life are essential. Useful in villas, schools, and light-commercial plantrooms to provide reliable on/off control with minimal pressure loss.

For close alternatives on Fepy, you can compare with these similar options: Crane Gate Valve PN20 1/2in: https://fepy.com/products/crane-gate-valve-pn20-1-2in, Crane Gate Valve PN20 1-1/4in: https://fepy.com/products/crane-gate-valve-pn20-1-1-4in, and Brass Gate Valve PN20 1in: https://fepy.com/products/brass-gate-valve-pn20-1in. These offer similar PN20 performance with varying sizes or materials for slightly different piping needs.

Consider the required pipe size (1 inch here), the PN20 pressure rating (up to 20 bar), the need for a full bore to minimise pressure drop, the benefits of a serviceable bonnet in humid environments, and the advantages of threaded ends for easy retrofits. Also factor maintenance practicality and the valve’s suitability for potable water and non-aggressive fluids.

Return options are available for eligible items in accordance with Fepy’s standard terms. For specifics, refer to the applicable return terms and conditions and contact Fepy support for guidance on eligibility and the return process.