Daler Rowney System 3 Acrylic Colour, Hooker’s Green, 500ml, Deep Earthy Green, Smooth Texture & Excellent Opacity

Volume: 500ml; Pigment: Hooker’s Green (a dark natural green tone); Finish/Opacity: high opacity for complete coverage; Drying: fast-drying acrylic suitable for multiple layers; Lightfastness: excellent, preserving vibrancy over time; Best for: landscapes, foliage, and natural scenes.

System 3 line offers a range of greens with different transparencies and hues. Hooker’s Green provides a deep, natural green for strong foliage and natural tones. For variety, you can compare it with Sap Green for lighter greens or Emerald Green for brighter tones. Alternatives available on Fepy include: https://fepy.com/product/daler-rowney-system-3-acrylic-colour-hookers-green-125ml, https://fepy.com/product/daler-rowney-system-3-acrylic-colour-sap-green-500ml, and https://fepy.com/product/daler-rowney-system-3-acrylic-colour-emerald-green-500ml.

You can use System 3 Hooker’s Green on primed canvas, canvas boards, heavyweight paper, wood panels, MDF, and other primed or sealed surfaces suitable for acrylics. For best results, ensure the surface is clean, dry, and properly primed if needed.

Shake or stir well before use. Apply in thin, even layers, letting each coat dry before applying the next. If you need greater opacity, apply additional coats or mix with a suitable acrylic medium to improve leveling. Use a broad flat brush for large areas and switch to a synthetic fine-tipped brush for detail work.

Rinse brushes with lukewarm water immediately after use. Use mild soap if needed to remove all paint. Rinse thoroughly and reshaped brushes before storing. Clean brushes promptly to prevent pigments from drying and hardening.

Yes. Daler Rowney System 3 Acrylics are formulated for safe, casual to professional use. They are non-toxic when used as directed, and packaged in water-based acrylics suitable for artists. Always work in a well-ventilated area and avoid ingestion. Keep out of reach of small children.

System 3 acrylics dry to the touch in a relatively short time (often within 10–30 minutes depending on thickness, air temperature, and humidity). For best results, recoat after the previous layer has set to avoid lifting. Full curing may take longer depending on thickness and layering.

Yes. Acrylic paints like System 3 can be thinned with water for washes or mixed with acrylic mediums to alter texture and drying time. For best results, test your mix on a scrap surface first, especially if combining with other brands or mediums.

System 3 offers professional-level opacity and a large 500ml volume at a competitive price point, making it a cost-effective choice for artists who use color heavily or complete larger works. If you’re new to System 3, you may compare the 500ml size with smaller tubes or bottles to find the best value for your workflow.

Seal the container tightly after use and store in a cool, dry place away from direct sunlight or heat sources. Keep the cap clean to prevent seal failure. Do not store in extreme temperatures, and avoid prolonged exposure to air to minimize skin formation on the surface.