Daler Rowney System 3 Acrylic Colour, Process Black, 59ml, Deep Matte Tone, Smooth Texture & High Opacity

Process Black refers to a deep, neutral matte black pigment used to create solid, uniform blacks with good depth and density in a single coat when needed.

High opacity means you can achieve complete coverage with fewer coats, reducing underpainting visibility and delivering bold, solid black results with minimal layering.

You can use it on primed canvas, illustration boards, heavy-weight paper, wood, and other suitable acrylic-friendly surfaces. For best results, prime non-primed surfaces and apply in even layers.

For thinning, use a small amount of water or a compatible acrylic medium to extend flow. For glazes and subtle shading, mix with appropriate acrylic glazing medium to maintain color depth while increasing transparency.

The quick-drying formula typically becomes touch-dry within minutes, depending on thickness and environment. Full curing occurs over 24 hours or longer with thicker layers.

Clean brushes with soap and warm water soon after use. Rinse thoroughly until the water runs clear and reshape bristles before storage.

Yes, it is a water-based, artist-grade acrylic designed for safe use. As with all artworks materials, avoid prolonged skin contact, and keep away from eyes. Use in a well-ventilated area and store capped when not in use.

System 3 is a versatile, mid-range acrylic designed for reliable coverage, smooth flow, and good lightfastness. It provides solid performance for everyday art tasks, with a balance of affordability and quality.

Store the paint tightly sealed in a cool, dry place, stir before use to re-disperse pigment, and apply consistent layer thickness. If needed, document your mixing ratios for repeatability.

Begin with a thin base layer, allow it to dry, and apply additional thin coats rather than heavy single coats. Layering helps maximize opacity, depth, and a true black finish while maintaining matte quality.