DC Fix Transparent Frosted Adhesive Foil, 45cm x 15m, Privacy & Light Filtering for Glass

Width: 45 cm; Length: 15 m; Frosted privacy effect that diffuses light; Peel-and-stick application; Durable and long-lasting adhesive; Water-resistant for moisture-prone areas; UV protection to help prevent interior fading.

Start with a clean, dry glass surface. Measure and cut the foil to fit your area, leaving a small excess for trimming. Peel away the backing and carefully position the foil at the top, then gradually smooth it downward from top to bottom using a squeegee or a credit card to press out air bubbles. Trim any excess edges with a sharp blade for a clean finish.

Yes. The peel-and-stick design allows you to reposition during application. Slowly align, then press firmly from the center outward to remove air pockets. If needed, lift and re-position before sealing the edges.

The foil is water-resistant and designed to withstand moisture, making it suitable for kitchens, bathrooms, and other humid spaces. It stays securely in place with its strong adhesive over time.

Primary surface: smooth, clean glass (windows, glass doors, partitions). For best results, avoid applying to rough, dusty, or highly textured surfaces and surfaces with oil or wax residues.

The frosted finish diffuses visibility, offering privacy while still allowing natural light to pass through, helping spaces feel bright and airy without clear sightlines.

Wipe with a soft damp cloth. Avoid abrasive scrubbers or harsh chemical cleaners that could dull the frosted finish. Dry with a clean cloth to prevent water spots.

Yes. It is designed for indoor use and uses a non-toxic adhesive. It’s low-odor and generally safe for households, though you should keep cuts or sharp tools away from children during installation.

Ideal for bathroom windows and shower screens, office partitions, glass doors, kitchen windows, and any glass surface where privacy is desired without sacrificing light.

If you’re deciding between similar DC Fix products on Fepy, you can consider: 1) DC Fix Frosted Window Film 50cm x 5m: https://fepy.com/product/dc-fix-frosted-window-film-50cm-x-5m – wider and shorter roll for smaller closures; 2) DC Fix Clear Adhesive Foil 45cm x 15m: https://fepy.com/product/dc-fix-clear-adhesive-foil-45cm-x-15m – clearer finish for visible textures; 3) DC Fix Matte Frosted Window Film 30cm x 5m: https://fepy.com/product/dc-fix-matte-frosted-window-film-30cm-x-5m – a similar frosted effect with a different size and finish. These options give you choice based on the area size and desired finish.

Yes. Start at one edge and smooth as you go, using a squeegee or card to push air bubbles toward the edges. If bubbles appear, gently lift the film from the nearest edge to re-smooth, then re-press. Work in small sections and ensure the surface is completely clean and free of dust before applying.