Decoduct 50mm Bend Slip

Key specs include: 50 mm pipe size; made from high-quality construction material resistant to corrosion; designed for indoor and outdoor use; suitable for high-pressure and vibration-prone environments; easy to install and maintain; applicable to residential, commercial, and industrial piping.

It is designed to fit 50 mm (50 mm OD) pipes and is produced from a corrosion-resistant material suitable for a range of liquids and environments; verify compatibility with your specific pipe material and liquid in your project.

Common uses include routing a 90-degree turn in piping runs for water supply, drainage, irrigation, and light industrial piping systems where a robust, durable 50 mm bend is needed.

Prepare the pipe ends by cleaning and deburring, align the slip fitting with the pipe run, insert the pipes into the bend slip until seated, and perform a pressure test after installation to check for leaks. Follow the manufacturer’s installation instructions for best results.

Periodically inspect for leaks, corrosion, or wear, keep the fitting clean, and ensure the seal and connection remain tight. Replace if you notice any damage or loss of integrity.

Yes, it is designed to resist high pressure and vibration. Always confirm the maximum operating pressure for your specific installation and ensure proper installation to maintain a leak-free connection.

Use the bend slip in accordance with local plumbing codes and industry standards. Ensure proper installation to prevent leaks, protect workers from sharp edges during handling, and use appropriate PPE when cutting and fitting pipes.

If you’re evaluating options, you might consider the 90-degree bend slip variant, a slip elbow, or a push-fit bend to suit different installation preferences. Alternatives on Fepy include: Decoduct 50mm Bend Slip 90 (https://fepy.com/products/decoduct-50mm-bend-slip-90), Decoduct 50mm Slip Elbow (https://fepy.com/products/decoduct-50mm-slip-elbow), and Decoduct 50mm Push-Fit Bend (https://fepy.com/products/decoduct-50mm-push-fit-bend). Each offers different connection styles and ease of installation, so choose based on your project requirements and user preferences.

Consider the required bend geometry, the type of connection you prefer (slip vs push-fit vs threaded), compatibility with your pipe material, installation ease, operating pressure, and overall cost. This Bend Slip emphasizes durability and simple installation for 50 mm piping runs.

To complement this bend slip, you might look at Decoduct 50mm Coupling (https://fepy.com/products/decoduct-50mm-coupling) and Decoduct 50mm Elbow (https://fepy.com/products/decoduct-50mm-elbow) for creating longer or more complex piping runs with consistent sizing and compatibility.