Decoduct 25mm PVC Long Bend Pipe

The pipe is made from high-quality PVC which provides strong resistance to chemicals and abrasion. It is UV resistant for outdoor exposure, resistant to corrosion and many chemicals, and designed to withstand mechanical wear, delivering long-lasting performance.

Ideal for shaping water, waste, and drainage in residential plumbing, sewer systems, and wastewater treatment setups. It also suits DIY projects where a reliable, cost-effective bend is needed.

A long bend reduces the number of joints and provides a smoother change in direction over a longer arc, which can lower potential leak points and improve flow for longer runs compared with a standard 90° elbow.

The Decoduct PVC Long Bend is designed for gradual directional changes, while the Long Radius Bend offers an even gentler curve for very high-flow or sensitive installations. Both minimize head loss, but the choice depends on your space and flow requirements. See https://fepy.com/product/decoduct-pvc-long-radius-bend-pipe for details.

Bends like the Long Bend redirect flow along a single path, while a Tee Connector creates a branch in the pipeline. Use the bend for directional changes; use a Tee when you need a branch off the main line. See https://fepy.com/product/decoduct-pvc-tee-connector for alternatives.

Typical installation steps: (1) measure and mark the run, (2) cut the pipe to length with a mitre or saw, (3) deburr and clean cut ends, (4) dry-fit to verify fit, (5) apply PVC primer to the pipe and fitting, (6) apply PVC cement and assemble, (7) hold in place until the cement sets, (8) test the system for leaks.

Use compatible fittings (couplings, adapters, and the corresponding diameter bend), PVC primer, and PVC cement. Ensure that you match the pipe size and joint type to your system for a secure, leak-free connection.

Follow local plumbing codes and safety procedures. Wear appropriate PPE (gloves and eye protection) when cutting and bonding PVC, ensure proper ventilation during solvent-welding, and use only approved cement and primers suitable for potable or non-potable applications as required by your project.

Regularly inspect for cracks, leaks, or signs of UV degradation in outdoor installations. Clean accumulated debris from the bend, avoid chemical exposure beyond PVC compatibility, and replace any damaged sections promptly to prevent leaks.

Select a diameter that matches your existing piping. Check the product dimensions, confirm the pipe schedule and wall thickness, and ensure the end fittings are compatible with your current connectors. Matching standard PVC sizes helps ensure a secure, leak-free connection.

Decoduct PVC Long Bend Pipe offers a durable, low-maintenance solution for drainage and plumbing. If you need to return or exchange, please review Fepy’s return policy on the product page for details and conditions applicable to returns.