Deli Heavy-Duty Staples, 23/23 Size, 23 mm Leg Length, Easily Bind Documents, Ideal for Office Use – Box of 1000 Pieces

Size: 23/23. Leg length: 23 mm. Material: galvanized steel for corrosion resistance. Tip design: hard chisel tips for straight penetration and secure clinches. Rigidity: heavy-duty wire resists bending under load. Binder compatibility: designed to work with compatible heavy-duty staplers.

Box contents: 1,000 staples.

Yes, these are sized for 23/23 heavy-duty staplers. Check your stapler’s compatible staple size (23/23) and ensure it accepts this leg length. If your device specifies 23/23 staples, these will fit and perform well.

1) Open the stapler as you normally would for reload. 2) Ensure you’re using 23/23 staples. 3) Align the stack so the crease is straight and margins are even. 4) Squeeze firmly to drive the staple through the stack and form a straight clinch. 5) Avoid overloading the stack to prevent jams.

The 23 mm leg length allows the staple to penetrate thicker packets, backs, and filing materials, producing a stronger, longer-lasting hold especially for archived documents and bulk bindings.

Handle staples with care to avoid puncture injuries. Keep away from children. When loading or removing staples, avoid placing fingers near the anvil or needle point and use proper stapling technique to reduce jams and misfeeds.

If you’re exploring variants, you can compare with these options on Fepy: 1) Deli Heavy-Duty Staples, 26-23, 1000 pieces: https://fepy.com/product/deli-heavy-duty-staples-26-23-1000-pieces 2) Deli General Staples, 23/18, 1000 pieces: https://fepy.com/product/deli-general-staples-23-18-1000-pieces These give you different leg lengths or general-purpose performance while staying within the same brand ecosystem.

Ideal for archiving and binder work, thick document sets, operation manuals, instructor binders, and bulk packet assemblies where a strong, secure hold is required without crushing pages.

Store in a dry, cool place in their original packaging or a sealed container. The galvanized finish provides corrosion resistance for long-term storage, but keeping them dry helps maintain performance and appearance.

Ensure you’re using the correct 23/23 staples and that the stack isn’t overly thick for a single staple. Clear any jammed staples, realign the stack, and reattempt with a steady, even squeeze. If issues persist, consider checking stapler compatibility or reducing stack thickness slightly.