Dewalt SDS+ Drill Bit-25mm X 400mm X 450mm

Diameter: 25 mm; Working depth: 400 mm; Overall length: 450 mm; SDS+ shank for easy hammer-drill compatibility; Tungsten carbide tip; Fully heat-treated for durability and wear resistance.

Yes. The bit uses an SDS+ shank, which is compatible with most SDS+ hammer drills. It also features a grooved centering point to help start holes accurately.

Use the grooved centering point to create a precise pilot mark, then apply steady pressure and let the bit cut through the material. The SDS+ design helps maintain alignment and drive, while the flute helps remove dust for a cleaner hole.

This bit is designed for drilling up to 400 mm in depth. To control depth precisely, use a depth stop or a drill with a depth gauge to match your required measurement.

Keep the bit dry and clean after use, avoid overheating by using appropriate drilling speed and moderation, and store in a dry place. The tungsten carbide tip is designed for long life, but cooling and cleaning between jobs help maintain performance.

Wear eye protection, hearing protection, and gloves. Secure the workpiece firmly, set the drill to hammer mode with appropriate speed, and avoid forcing the bit to prevent tip or shank damage.

Similar 25 mm SDS+ bits from Dewalt, Bosch, and Makita on Fepy offer comparable diameter and depth with brand-specific tips, coatings, and prices. See other 25 mm SDS+ options on Fepy to compare tip geometry, length, and price.

Ideal for drilling anchor holes into concrete, masonry, stone, blockwork, and paving when installing anchors, electrical boxes, or plumbing through hardened materials.

Power off the drill, open the SDS+ chuck, insert the bit fully, lock it in place, and ensure it is seated correctly before starting. When removing, release the chuck and withdraw the bit straight to avoid binding.

Store the bit in a dry environment, away from moisture and impacts. Keep it clean and free from magnets or contaminants that could affect performance.

If you’re not satisfied, you can explore the standard return options offered by Fepy for this product, provided the item is unused and in its original condition within the applicable return window. Contacting Fepy support within that window will guide you through the process.

You can compare with these nearby options on Fepy: Dewalt SDS+ Drill Bit 25mm x 400mm x 450mm — https://fepy.com/product/dewalt-sds-drill-bit-25mm-x-400mm-x-450mm; Bosch SDS+ Drill Bit 25mm x 400mm x 450mm — https://fepy.com/product/bosch-sds-drill-bit-25mm-x-400mm-x-450mm; Makita SDS+ Drill Bit 25mm x 400mm x 450mm — https://fepy.com/product/makita-sds-drill-bit-25mm-x-400mm-x-450mm.