Dewalt SDS+ Drill Bit-8mm X 50mm X 110mm

Specifications: 8 mm diameter, 50 mm drill length, 110 mm total length, titanium-coated carbide tip, heat-treated hardened steel, multi-fluted for dust removal, straight shank, and SDS+ compatibility.

The titanium-coated carbide tip reduces wear and extends bit life, while the carbide hardness helps maintain sharpness under tough masonry drilling, enabling faster starts and longer life in concrete and masonry.

The multi-fluted design enhances dust removal and reduces binding or jamming, which leads to smoother drilling, cleaner holes, and better overall efficiency in hard materials.

Yes, it is designed for SDS+ cordless drills. It uses a straight shank to minimize wobble and help deliver power more directly to the bit tip; ensure your drill’s chuck can accommodate a straight shank.

Use a hammer/impact setting on your drill, start at a moderate speed, apply steady, moderate pressure, and let the bit do the work. Periodically withdraw the bit to clear dust and prevent overheating; keep the bit cool as needed.

While optimized for concrete and masonry, it can drill through brick or block masonry, though performance may vary depending on material hardness and composition.

Keep it clean and dry after use, avoid overheating by drilling in short bursts and allowing cooling periods, remove dust from flutes, and store in a dry place to prevent rust.

An 8 mm bit is a mid-range size suitable for medium anchor holes and general masonry work. Choose 8 mm when your fasteners or anchors require that diameter, or when you need a balance between hole size and drilling speed.

You can compare with these options on Fepy: - Dewalt SDS Plus Drill Bit 6mm x 50mm x 110mm: https://fepy.com/product/dewalt-sds-plus-drill-bit-6mm-50mm-110mm - Bosch SDS-Plus Drill Bit 8mm x 50mm x 110mm: https://fepy.com/product/bosch-sds-plus-drill-bit-8mm-50mm-110mm - Makita SDS-Plus Drill Bit 8mm x 50mm x 110mm: https://fepy.com/product/makita-sds-plus-drill-bit-8mm-50mm-110mm

Always wear eye protection and a dust mask, secure the workpiece, use gloves as needed, and avoid loose clothing. Work in a well-ventilated area and follow your drill manufacturer's safety instructions for SDS+ use.

Yes. The Dewalt bit combines a carbide-tipped, titanium-coated tip with a robust hardened-steel body and a design optimized for dust removal and durability, making it a solid choice for frequent masonry drilling in both professional and DIY settings.