Name: K2 4.5" Thin Tile Diamond Cutting Disc
Brand: Fepy
SKU: 12957-NOS
Price: 33.33 AED
Availability: InStock

Question 1

What is the K2 4.5" Thin Tile Diamond Cutting Disc best used for?

Accepted Answer

This disc is designed for precise cutting of thin ceramic or porcelain tiles. At 4.5 inches in diameter, it fits standard angle grinders and delivers clean, smooth cuts suitable for DIY tiling projects and renovations.

Question 2

What are the key specifications and features of this disc?

Accepted Answer

Key specs include a 4.5" diameter, thin tile-cutting design, diamond particle segments for durability, and compatibility with wet or dry cutting on a standard angle grinder. It’s built for high-quality performance and long life on DIY tile work.

Question 3

Can I use this disc for both wet and dry cutting, and are there any limitations?

Accepted Answer

Yes, the disc is designed for both wet and dry cutting. Wet cutting helps keep dust down and cools the disc, while dry cutting is convenient when water access is limited. Always follow grinder manufacturer guidelines and use proper safety precautions.

Question 4

Is this disc compatible with my angle grinder and what should I check before mounting?

Accepted Answer

This disc is built for standard angle grinders. Before mounting, ensure the grinder’s arbor size matches the disc, the RPM rating is within the disc’s specification, and that you use the appropriate guard and a secure flange/nut for safe operation.

Question 5

What are common use cases for this tile cutting disc?

Accepted Answer

Common use cases include trimming ceramic or porcelain tiles for fitting around fixtures, creating straight tile edges, and preparing tiles for installation in bathrooms, kitchens, and backsplashes during DIY tiling projects.

Question 6

How should I install and use the disc safely to get the best results?

Accepted Answer

Install the disc with a secure flange, tighten the nut firmly without over-tightening, and attach a proper guards on the grinder. Mark your cut line, start slowly to establish the groove, apply steady, even pressure, and avoid twisting or forcing the wheel. If cutting wet, maintain a consistent water flow to cool the disc and reduce dust.

Question 7

What safety precautions should I follow when using this disc?

Accepted Answer

Always wear eye protection, hearing protection, gloves, and a dust mask or respirator for dry cuts. Use a tool rest or guard, keep hands away from the rotating disc, and never cut materials that exceed the disc’s intended use. Check the disc for cracks or damage before each use and replace if compromised.

Question 8

How does this disc compare to other tile discs available on Fepy?

Accepted Answer

For similar tile-cutting performance on Fepy, you can compare to other 4.5" tile diamond discs such as Bosch and DEWALT options: Bosch 4-1/2-inch Tile Diamond Disc (https://fepy.com/product/bosch-4-1-2-inch-tile-diamond-disc) and DEWALT 4-1/2-inch Tile Diamond Disc (https://fepy.com/product/dewalt-4-1-2-inch-tile-diamond-disc). These alternatives provide comparable tile-cutting capability with brand-specific design features.

Question 9

What materials can I expect to cut with this disc besides thin tiles?

Accepted Answer

While optimized for thin ceramic/porcelain tiles, you may also cut similar hard-brittle tile-like materials depending on your grinder and technique. Always test on scrap material and follow the manufacturer’s recommendations for best results and disc life.

Question 10

How can I maximize the lifespan and performance of this disc?

Accepted Answer

Use the disc within its rated speed, avoid overheating by cutting with a steady pace and using wet cooling when possible, keep the disc clean and free from debris between cuts, and inspect for wear or damage after each job. Replace the disc if you notice cracks, warping, or significant wear.

Question 11

Is this disc a good value for DIY tiling projects compared to similar options?

Accepted Answer

Yes, for DIY tiling tasks that require clean, accurate cuts on thin tiles, this disc offers reliable performance and durability. When evaluating value, consider cut quality, user feedback, and compatibility with your grinder. You can also compare against other reputable brands on Fepy, such as Bosch and DEWALT tile discs, to assess price and performance trade-offs.

Question 12

Can I use this disc on porcelain tiles, ceramic tiles, or other tile types?

Accepted Answer

The disc is designed for thin tiles and is suitable for ceramic or porcelain tiles commonly used in DIY tiling. For other tile types, confirm compatibility with the manufacturer’s guidelines and conduct a small test cut first.

K2 4.5" Thin Tile Diamond Cutting Disc

Features & Benefits

Specification

Attachments

Frequently Asked Questions