DP 30 X 30 X 3mm SS304 Marble Angle

Key specs: material – SS304 stainless steel; cross-section – 30x30 mm; thickness – 3 mm; finish – marble appearance; purpose – edge and corner protection; easy to install with screws or rivets.

Installation steps: measure the length needed, cut to size with metal snips or a hacksaw, deburr edges, align the angle along the edge or corner, mark and drill pilot holes, attach with stainless steel screws or rivets, and seal joints with a compatible sealant if desired. Ensure surfaces are clean and dry before installation.

Tools: tape measure, miter/cut tool for metal, deburring file, drill with appropriate drill bits, stainless steel screws or rivets, screwdriver or rivet gun, and optional silicone sealant. Safety gear like gloves and eye protection is recommended when working with metal.

Yes. The 30x30x3mm marble angle can be cut to length and mitered as needed using standard metalworking tools. After cutting, deburr edges for a clean finish and proceed with installation.

Common uses include protecting wall corners, cabinet and furniture edges, tile edge protection, door frames, kitchen backsplashes, and any interior edge where a durable, decorative edge protector is desired.

Yes. SS304 stainless steel is corrosion-resistant and non-toxic, making it suitable for indoor environments such as kitchens and bathrooms. To maintain, wipe with a mild soap solution and water, then dry; avoid abrasive cleaners that could scratch the finish.

Compared to smaller or larger variants, this 30x30x3mm size offers robust protection for medium-height edges and corners with a marble-look finish. For alternatives, you can consider the 25x25x3mm variant for tighter spaces or the 40x40x3mm variant for broader edge protection, both available on Fepy.

Alternative options on Fepy include: SS304 Marble Angle 25x25x3mm (https://fepy.com/product/ss304-marble-angle-25x25x3mm) and SS304 Marble Angle 40x40x3mm (https://fepy.com/product/ss304-marble-angle-40x40x3mm). These provide different coverage and aesthetic scales to suit your project.

It is typically fixed with screws or rivets for best durability, but you can use appropriate high-strength adhesive if you prefer no-drill mounting on compatible surfaces. For long-term reliability, mechanical fasteners are recommended with clean, prepared surfaces.

Keep it clean with a mild soap solution and water; dry thoroughly to prevent water spots. Avoid abrasive cleaners that could scratch the finish. If needed, a non-abrasive stainless steel polish can help restore shine. Regular inspection for loose fasteners and signs of corrosion will help maintain protection.