Name: Eagle Impulse Heat Sealer, 200mm Seal Length, Heating Time 0.2–1.5s, Used for Fast Plastic Bag Sealing
Brand: Fepy
SKU: 45619-NOS
Price: 73.33 AED
Availability: InStock

Question 1

What is the Eagle EIS-200 Impulse Heat Sealer and what does it do?

Accepted Answer

The Eagle EIS-200 is a compact, corded impulse heat sealer designed for professional packaging. It seals thermoplastic films up to 200 mm long with a 2 mm seam, delivering fast, precise seals in about 0.2 to 1.5 seconds using 300 W of power and an input range of 110–230 V.

Question 2

What are the key specifications of the EIS-200?

Accepted Answer

Seal length: 200 mm; seal width: 2 mm; max material thickness: 0.3 mm; power: 300 W; sealing time: 0.2–1.5 seconds; voltage: 110–230 V; power corded design for steady performance.

Question 3

What materials can I seal with the EIS-200?

Accepted Answer

Suitable for poly bags and laminated films up to about 0.3 mm thick. Not recommended for foil or metal foils. Always verify film compatibility with heat sealing before use.

Question 4

How do I operate the EIS-200?

Accepted Answer

Place the bag edge under the sealing bar, align the film, and press the handle to initiate sealing. Hold for 0.2–1.5 seconds, then release and allow a brief cooldown before handling. Ensure the sealer is plugged into a suitable 110–230 V outlet.

Question 5

What are common use cases for the EIS-200?

Accepted Answer

Ideal for small to mid-size packaging tasks: shipping poly bags for e-commerce orders, product samples, bakery or snack packaging, and general product protection on busy packing lines.

Question 6

How does the EIS-200 compare to the Eagle EIS-100 and EIS-300 on Fepy?

Accepted Answer

The EIS-200 is mid-range in seal length and power. The EIS-100 offers a shorter 100 mm seal for smaller bags with lower power, while the EIS-300 provides a longer 300 mm seal for larger bags and higher throughput. See the alternatives here: EIS-100: https://fepy.com/product/eagle-eis-100-impulse-heat-sealer, EIS-300: https://fepy.com/product/eagle-eis-300-impulse-heat-sealer

Question 7

What safety tips should I follow when using the EIS-200?

Accepted Answer

Keep hands clear of the sealing bar, use on a stable heat-resistant surface, unplug when not in use, and allow the unit to cool briefly after sealing. Avoid contact with hot surfaces and keep liquids away from the device.

Question 8

Are there any installation or space requirements for the EIS-200?

Accepted Answer

Yes. Use a stable, level surface and ensure access to a suitable 110–230 V power outlet. Provide adequate clearance around the unit for ventilation and safe handling of sealed products.

Question 9

How do I troubleshoot a weak or failed seal with the EIS-200?

Accepted Answer

Check film compatibility and thickness (≤0.3 mm), ensure the bag edge is straight and fully seated under the seal, verify the sealing time setting (0.2–1.5 s), and inspect for wrinkles or moisture in the film. If problems persist, re-check alignment and try a fresh section of film.

Question 10

Is the EIS-200 a good fit for a growing business with increasing packaging needs?

Accepted Answer

Yes. It offers a balanced combination of seal length (200 mm), 300 W power, fast sealing times, and versatility for varying bag sizes, making it suitable for expanding packaging workflows on a mid-sized budget.

Eagle Impulse Heat Sealer, 200mm Seal Length, Heating Time 0.2–1.5s, Used for Fast Plastic Bag Sealing

Features & Benefits

Specification

Attachments

Frequently Asked Questions