Name: Eagle EIS-300 Impulse Heat Sealer, Seal Length 300mm, Heating time 0.2-1.5Sec
Brand: Fepy
SKU: 45620-NOS
Price: 100.00 AED
Availability: InStock

Question 1

How does the Eagle EIS-300 Impulse Heat Sealer actually work?

Accepted Answer

The Eagle EIS-300 uses an impulse heating element that heats up for a precise, short duration each time you seal. When you press and hold the handle, the sealed area heats and fuses the bag material quickly—creating a strong, uniform seal along the full 300 mm length in about 0.2–1.5 seconds, depending on settings.

Question 2

What materials and bag thickness can the EIS-300 seal?

Accepted Answer

It’s designed for a range of plastic films commonly used in packaging. The sealing thickness is up to about 0.4 mm, making it suitable for thin to medium-thickness bags such as PE/PP-based films and laminated pouches used in food, pharma, and retail applications.

Question 3

What are the key specifications I should know before buying?

Accepted Answer

Key specs include a 300 mm seal length, 3 mm seal width, 400 W power, sealing time of 0.2–1.5 seconds, and an input voltage range of 110–230 V AC. It’s built for durable, fast sealing and features a user-friendly control panel for setting timing and temperature as needed.

Question 4

Which applications benefit most from the EIS-300 in a packaging workflow?

Accepted Answer

Ideal for high-volume packaging operations in food service, grocery, pharmaceutical labeling, and retail goods. It’s well-suited for sealing bags of snack items, dried foods, medical or cosmetic sachets, and other flexible plastic pouches that require fast, reliable seals.

Question 5

How do I set up and start using the EIS-300?

Accepted Answer

1) Place the heat sealer on a stable surface and plug into a suitable outlet. 2) Power on and set your desired sealing time and, if applicable, temperature using the control panel. 3) Align the bag on the seal bar and press the handles to initiate the seal. 4) Allow the seal to cool briefly before removing the bag. 5) Clean the seal area after use and store safely.

Question 6

What safety practices should I follow with this machine?

Accepted Answer

Always unplug the unit before cleaning or maintenance. Keep hands away from the hot sealing surface when in use. Use the machine on a stable, non-slip surface and ensure the area is clear of liquids and flammables. Train operators on proper hand placement and release timing to avoid injuries.

Question 7

What comes in the box, and are there recommended accessories?

Accepted Answer

Typically you’ll receive the EIS-300 heat sealer with its power cord and a user manual. Depending on the vendor, spare parts such as Teflon sheets or replacement seals may be available separately—check compatibility with your film type and thickness before purchasing.

Question 8

How does the EIS-300 compare to similar models on Fepy.com?

Accepted Answer

Compared to smaller 150–200 mm models, the EIS-300 offers a longer 300 mm seal length for wider bags and higher throughput. It also uses a 400 W heater for efficient seals on a broad range of films. For longer-term line efficiency, you might also consider slightly larger 400–600 mm models that extend seal length while maintaining fast cycle times.

Question 9

Are there recommended operating practices to maximize seal quality?

Accepted Answer

Yes. Ensure the film is properly aligned and free of wrinkles. Use the correct sealing time for the material thickness, and avoid over-sizing bags beyond the max seal length. Let the seal cool briefly before handling to prevent delamination or soft seals.

Question 10

What troubleshooting steps can I take if seals aren’t coming out right?

Accepted Answer

Check material compatibility and thickness (ensure it’s within the 0.4 mm range). Verify the seal time is appropriate for the film; if the seal looks weak, increase the sealing time slightly or confirm the heater isn’t experiencing intermittent power. Ensure the bag is properly seated and there is adequate pressure on the seal bars. Finally, inspect the heating element for any debris or wear.

Question 11

Would I benefit more from the EIS-300 or a larger/smaller alternative on Fepy?

Accepted Answer

If you regularly seal 300 mm wide bags and need fast cycle times, the EIS-300 is a strong middle-ground choice. For smaller operations with narrow bags, a shorter model may offer adequate speed and lower cost. For high-volume lines requiring longer seals, a larger model with 400–600 mm seal length could improve throughput at the expense of footprint and cost.

Question 12

Where can I learn about close alternatives on Fepy and how they stack up?

Accepted Answer

You can explore similar options from Eagle on Fepy’s catalog to compare features, prices, and specs. For example, consider these nearby options: Eagle EIS-150 Impulse Heat Sealer (https://fepy.com/product/eagle-eis-150-impulse-heat-sealer) and Eagle EIS-400 Impulse Heat Sealer (https://fepy.com/product/eagle-eis-400-impulse-heat-sealer). These pages provide at-a-glance spec differences to help you decide which model best fits your scale and material needs.

Eagle EIS-300 Impulse Heat Sealer, Seal Length 300mm, Heating time 0.2-1.5Sec

Features & Benefits

Specification

Attachments

Frequently Asked Questions