Ecolink B5007 840 T5 Integrated Batten

15000 hours is the expected lifespan of the LED module under typical use. 85 lm/W is the luminous efficacy, indicating energy-efficient light output. IP20 means the luminaire is protected against solid objects larger than 12.5 mm but not rated for wet locations. IK02 is a basic impact resistance rating, suitable for general indoor use. Together these specs indicate a durable indoor light with solid efficiency and modest impact resistance.

The B5007 offers three selectable color temperatures (CCTs) and four length options. To choose, consider the room function and mood you want (e.g., warmer light for welcoming spaces, cooler light for task-oriented areas) and measure the mounting distance and ceiling height to match the appropriate length. If you’re replacing existing battens, match the length to the existing fixture to ensure a clean fit.

IP20 indicates protection against solid objects larger than 12.5 mm and no protection against water, so this batten is intended for dry indoor environments. IK02 provides basic impact resistance suitable for typical interior use. It is not designed for outdoor or damp locations.

Yes, the B5007 is designed to replace traditional battens in suitable indoor fixtures. It has an integrated driver and is connected to mains voltage per standard electrical practice. Ensure you select the correct length to fit the existing cutout and that the supply voltage matches the luminaire specification. No separate ballast is required.

Power off the circuit before starting. Remove the existing battens, align the B5007 with the mounting points, and secure it using the appropriate fixings for your ceiling type. Connect the live and neutral wires to the luminaire’s terminals (following local electrical codes), mount the cover/trim if provided, and restore power. If you’re unsure about wiring or mounting, consult a licensed electrician.

The B5007 uses an integrated LED engine with a long life of up to ~15,000 hours. Maintenance typically involves periodic cleaning to remove dust from the diffuser or lens. Since the LED is integrated, there’s no ballast to replace; if the unit fails, the entire luminare is typically replaced rather than changing individual LEDs.

Common applications include offices and corridors, retail display lighting, reception areas, schools, and other indoor commercial or residential spaces where a slim, low-profile batten with selectable CCTs and multiple lengths is advantageous.

The B5007 provides high efficiency at 85 lm/W, which is significantly more energy-efficient than many traditional fluorescent battens. Over time this reduces electricity usage and operating costs, especially in areas with long operating hours or multiple fixtures.

Dimming capability is not specified for this model. If dimming is required, verify compatibility with your dimming system or choose a model explicitly rated as dimmable. Always ensure any control system is compatible with integrated LED battens and follows the manufacturer’s guidance.

If you’re comparing similar integrated battens on Fepy.com, you can explore related Ecolink models such as the B5005 840 T5 Integrated Batten and the B5009 840 T5 Integrated Batten for side-by-side specs and compatibility. See these product pages for direct comparisons: https://fepy.com/product/ecolink-b5005-840-t5-integrated-batten and https://fepy.com/product/ecolink-b5009-840-t5-integrated-batten. You can also check broader Ecolink batten options at https://fepy.com/product/ecolink-b5012-840-t5-integrated-batten for additional length and CCT configurations.