Era 4" UPVC Cross Tee

Key specs: material is premium UPVC, nominal size is 4", internal diameter is 4.45", designed for long life (up to ~25 years under proper use), white finish, lightweight for easy handling, smooth internal/external surfaces to minimize leaks, and it’s compatible with Era 4" UPVC pipes and fittings. It also features multiple seals and connections for added stability.

It’s designed to be compatible with Era 4" UPVC pipes and fittings. Use it as a cross-connection with other ERA 4" UPVC components to maintain a consistent system.

Common uses include creating a branch from a main 4" line, splitting flow to two directions, or combining two pipe runs into a single network in drainage or water distribution projects. It’s ideal when a four-way connection is needed in a 4" UPVC piping system.

A cross tee has four openings arranged in a cross pattern, allowing connections in two perpendicular directions as well as a third direction. A standard 4" UPVC tee typically has three openings (a main run plus a single branch). The cross tee enables more complex 4-way junctions.

Typical installation steps: (1) shut off flow and cut the pipe ends squarely, (2) deburr and clean the pipe ends, (3) apply primer to the pipe ends and the inside of the cross tee sockets, (4) apply solvent cement to the pipe ends and the socket openings, (5) insert the pipes into the cross tee and hold briefly to allow cement to set, (6) ensure proper alignment and allow the joint to cure per cement manufacturer's guidelines, (7) inspect for leaks after pressurizing the system.

Yes. Wear appropriate PPE (gloves and eye protection) when cutting, fitting, and applying cement. Work in a well-ventilated area to avoid inhaling cement fumes. Handle edges carefully to avoid cuts, and store fittings away from direct sunlight and extreme heat when not in use.

The cross tee is rated for a long service life of up to about 25 years under proper conditions. Maintenance is minimal—inspect for cracks or leaks periodically and ensure joints remain clean and properly cemented. Replace any damaged fittings promptly to maintain system integrity.

Alternative 4" fittings you might consider on Fepy.com include: 1) 4" UPVC Tee: https://fepy.com/product/era-4-inch-upvc-tee – a three-way fitting for creating a branch from a main line; 2) 4" UPVC Elbow (90-degree): https://fepy.com/product/era-4-inch-upvc-elbow-90-degree – for changing direction in a run; 3) 4" UPVC Coupler: https://fepy.com/product/era-4-inch-upvc-coupler – for joining two pipe ends in a straight run. Each serves different routing needs while maintaining the same pipe material and sizing.

You may need primer and solvent cement suitable for UPVC, a pipe cutter, deburring tool, clean rags, gloves, and clamps as needed to hold fittings while the cement cures. Depending on your project, you might also use pipe supports and seals that come with ERA 4" UPVC components.

To verify authenticity, check the product title and specifications on the Fepy listing for the Era 4" UPVC Cross Tee, ensure the brand is Era, and confirm compatibility with Era 4" UPVC pipes. If you’re unsure, reach out to Fepy support for confirmation on product legitimacy and sourcing.

Consider your flow requirements, the pipe system design, and whether you need a four-way junction. For a 4" UPVC system, this cross tee matches ERA 4" pipes and fittings and provides a four-way connection. Check the internal diameter (4.45") to ensure it meets your clearance and flow needs, and verify the rest of your components are ERA 4" UPVC compatible to avoid mismatches.

The cross tee is described as having polished internal and external surfaces to ensure smooth connections and minimize leakage risk. Such surface treatment helps improve seal integrity and ease of assembly when used with compatible UPVC fittings and primers.