Fosroc Brushbond Liquid (7kg) and Powder (20kg) 27kg - Light Grey

Brushbond exhibits excellent adhesion to concrete, masonry, steel, and other surfaces. It has a pot life of approximately 30 minutes at 27°C and achieves a tensile strength of over 1 N/mm², making it suitable for applications requiring high durability and flexibility.

The application temperature for Fosroc Brushbond should be between 10°C and 45°C. It is essential to ensure that the surface is clean and free from contaminants that could affect adhesion before application.

For optimal performance, Brushbond should be applied in two coats to achieve a total dry film thickness of at least 2mm. Areas subjected to moderate to heavy loads may require a minimum thickness of 4mm.

Yes, Brushbond is designed to be waterproof and can be applied in conditions where moisture is present. However, it is crucial to prepare the substrate properly by ensuring it is damp but not saturated with water.

Fosroc Brushbond provides excellent adhesion to various substrates, including concrete, asphalt, masonry, and metals like steel and aluminium. This versatility makes it suitable for diverse applications such as basements, roofs, and water tanks.

Brushbond is classified as non-toxic, making it safe for use in various environments. However, standard safety precautions should still be followed during handling and application.

To mix Brushbond, pour the liquid component into a container, add water if necessary, and gradually incorporate the powder while mixing with a slow-speed drill. The mixture should then be applied using a stiff brush or roller to achieve the desired thickness.